Becker Active 43 Series Operating Instructions Manual page 94

>>> NAVIGATION MODE
> D
> GB
> F
> I
> Select
Block for current route
> E the section of the route for the current
route guidance session only.
> PL
Note:
> CZ
If the route section is more than 10 kilo-
metres long, you can choose, in another
> H
menu, whether to block the entire section
or just part of it.
> RU
> Select
Block permanently
section of the route for future route
guidance sessions too.
94
You can now set whether or not the road
should be blocked for each day of the
week.
> Press the buttons with the days on
which the road should not be blocked
(the clock symbol under the day disap-
pears).
to block
> Confirm your settings by pressing the
button.
OK
or
> Press the
days and set up to two times when the
road should be blocked.
1
to block the
2
> Using the buttons
od when the road is to be blocked on
this day.
> Using the buttons
riod when the road is to be blocked on
this day if necessary.
button under one of the
1 1 1
2 2 2
set the first peri-
1
set the second pe-
2
Note:
Press the button to set a block
Block 24 h
for an entire day.
Press the button to also
Use setting for...
use the block on other days.
> Confirm your settings by pressing the
button.
OK
Note:
The list of roads that you have perma-
nently blocked can be edited as described
under "The Blocked roads button" on
page 72.