Becker Active 43 Series Operating Instructions Manual page 81

Map display with Junction View
You can display a detailed and realistic
view of the lane situation at many motor-
way junctions.
To do this, switch on the
Junction View
function as described under "The Guid-
ance info button" on page 60.
If you are then directed through a motor-
way junction by the Navigation device,
you will see a corresponding display.
> Follow the lanes indicated with the ar-
rows.
Note:
You can switch back to the normal map
display by tapping the display.
Using the map display
Repeating the last announcement
During route guidance, the system an-
nounces important information, e. g. the
next driving manoeuvre. The last an-
nouncement can be repeated with updat-
ed information.
> Press the speaker symbol in the preview
area while route guidance is active.
The last announcement is repeated with
updated information. The volume is also
displayed.
Changing the announcement volume
The volume of announcements can be ad-
justed.
> Press the speaker symbol in the preview
area while route guidance is active.
NAVIGATION MODE
The bar display indicates the volume.
> Press or to increase or
decrease the volume.
> Press in order to mute the
announcements.
The button will now have a red border.
> Press again in order to cancel the
mute function.
¤
Warning.
Always adjust the volume so that you
can still hear any ambient noise while
driving.
The bar display disappears again automat-
ically after a short while if no button is
pressed.
>>>
> D
> GB
> F
> I
> E
> PL
> CZ
> H
> RU
81