Operating The Navigation Device Using The Remote Control - Becker Active 43 Series Operating Instructions Manual

> Remove the old battery and replace it
with a new type CR2032/DL2032 bat-
tery.
> Place the remote control back onto the
base plate.
> Reconnect the remote control to the
Navigation device as described above.
Operating the Navigation device using
the remote control
You can control most functions and the
main functions of the Navigation device
using the remote control.
It is provided with five buttons and a
control ring.
The main functions of the individual
remote control buttons are:
6
5
4
But- Basic function
ton
Opens the map display. Opens
1
the options menu for the map dis-
play if the map is already active.
Starts the telephone mode. The
2
function is equivalent to pressing
the button in the main
Phone
menu or the button in the
options menu of the map display.
But- Basic function
ton
Starts up the voice entry.
3
The function is equivalent to
pressing the
the input menu.
Press briefly:
4
• Displays menu markings.
• Selects and confirms menu
entries.
1
Press and hold:
2
• Confirms the previous entry in
the input menu.
3
• E.g. in fast access mode - opens
the Edit menu (
• In the address input - accepts en-
tries and starts route guidance.
Back function - is equivalent to
5
the function of the
Pressing and holding the button
opens the main menu.
Control ring for selecting entries
6
in lists and menus.
Displays menu markings.
GENERAL OPERATION
button, e.g. in
button).
button.
33
>>>
> D
> GB
> F
> I
> E
> PL
> CZ
> H
> RU