Becker Active 43 Series Operating Instructions Manual page 46

>>> NAVIGATION MODE
Note:
> D
If two words need to be entered you must
separate them with the character
> GB
When sufficient letters have been entered
> F
it will automatically switch to a list from
which you can select the town. However,
> I
you can switch to the list before this by
> E
pressing the
> PL
Note:
If you have entered a postcode, the name
> CZ
of the town will be hidden in the input
menu to start with. If you then enter the
> H
street name, the name of the town will
> RU
then also be displayed.
46
Using the town list
Once a few letters of the desired town
have been entered you can display a list of
.
all the towns with the relevant letter com-
binations or this list will be displayed au-
tomatically.
> Press the
the screen to call up the list.
button.
You can scroll through the displayed list
using the
> Press the button for the required town.
Selecting the street
In the Street menu field the street and
house number can be entered separately
using a letter and number field.
The Navigation device excludes all impos-
sible letter combinations and activates
button on the right of only those letters that could give an exist-
ing street name.
A house number can only be chosen once
the street has been selected and if house
numbers are included in the data.
> Enter the letters of the destination street
consecutively.
When sufficient letters have been entered
it will automatically switch to a list from
which you can select the street. However,
buttons.
you can switch to the list before this by
pressing the button.