Switching On - Becker Active 43 Series Operating Instructions Manual

>>> GENERAL OPERATION

Switching on

> Set the On/Off switch on the underside
> D
of the unit to On.
> GB
> Press the button on the top of the
Navigation device.
> F
The unit is switched on. The manufactur-
er's logo appears on the touchscreen.
> I
> E
> PL
> CZ
> H
> RU
When the Navigation device is started for
the first time, the language selection is
displayed automatically.
Using the
ble to scroll through the list in the direc-
tion of the relevant arrow.
24
> Press the button for the required
language.
> The selection is confirmed by pressing
.
OK
> Then select the desired voice.
Note: for models with TTS
Voices with a (TTS) tag support the text-
to-speech function (e.g. announcing
roads and reading out text messages).
A short example announcement is given.
> Confirm your selection by pressing the
OK
The following prompt appears shortly
afterwards:
buttons, it is possi-
button.
> If you agree to the request contained in
this prompt, press the button.
OK
Note:
Use of the Navigation device is only
permitted in accordance with the
national road traffic
applicable at the time.
regulations