Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Becker READY 45 LMU
Summary of Contents for Becker READY 45 LMU
- Page 1 OPERATING GUIDE...
-
Page 2: Table Of Contents
Contents >>> CONTENTS Registration Switching the Navigation Warranty Repairs device on/off Safety instructions > D Emissions and disposal Switching on The Navigation device Switching off > GB Overview of the scope of Delivery Operating manual contents Basic information about the Use of the product Overview of the navigation device >... - Page 3 CONTENTS >>> Content Manager Entering the address The Guidance info button Installing the Content Manager Selecting a country The Route options button > D Selecting an address and starting Starting the Content Manager Selecting the vehicle profile route guidance Transferring pictures (depending on model) >...
- Page 4 >>> CONTENTS Traffic announcements using TMC Map display options Searching for cell phones Connecting from device lists (depending on the model) Displaying the whole route > D Connecting a mobile phone Displaying TMC messages on the map 85 Selecting alternative routes Disconnecting a connected telephone 113 Using TMC Change route options...
- Page 5 CONTENTS >>> Country information NOTICE Blocking a section of the road EU Declaration of Conformity > D permanently Disposal of the unit Trip computer Disposal of the battery > GB (depending on model) Duty to supply information according > F to battery legislation (BattV) Settings Removing the battery...
-
Page 6: Warranty
> F 24-month warranty (battery: 6 months) thorised by the manufacturer or by the for BECKER units, beginning on the day manufacturer himself. > I of delivery to the final customer (buyer). This warranty does not affect or Within the framework of the warranty, >... -
Page 7: D Safety Instructions
SAFETY INSTRUCTIONS >>> Safety instructions > D ¤ Safety instructions > GB • Use of the device is only permitted if the traffic conditions are suitable and you are absolutely sure that its use presents no risk, distraction or inconvenience to you, your passengers or other road users. >... - Page 8 > I • Only use original BECKER accessories. This way it is ensured that all relevant provisions will be met and that health risks > PL and damages to the product are avoided. Dispose of the used product or the battery according to the legal regulations in effect.
-
Page 9: The Navigation Device
> D This operating manual contains the This product is a high performance PND The use of the GPS = Global Positioning description of your Becker navigation (Personal Navigation Device) for use in system eliminates the tedious process > GB equipment. -
Page 10: Pl Unpacking The Navigation Device
: optional EU19 (see also page 14). > Unpack the contents carefully and Vehicle integration check them thoroughly. Becker OneShot speech control Speed camera warning Driver warnings Telephone Trip computer 3D city view Remote control... -
Page 11: Scope Of Delivery
THE NAVIGATION DEVICE >>> Description of the device Scope of delivery Complaints In case of complaints, please consult > D The navigation device consists of the your dealer. The equipment may be sent basic unit and the accessories included in >... -
Page 12: The Basic Unit
>>> THE NAVIGATION DEVICE The basic unit Cable for power supply from cigarette USB connection cable lighter The basic unit consists of the complete With the USB connection cable provided, > D electronic unit: it is possible to connect the Navigation This cable allows the unit to be connect- >... -
Page 13: Cable For Vehicle Integration
THE NAVIGATION DEVICE >>> Information about the Registration Cable for vehicle integration (for certain models only) > D documentation You can register your product using our With a 4-pin 2.5mm jack cable you can software service. We will then inform >... -
Page 14: Overview Of The Scope Of Delivery
>>> OVERVIEW OF THE SCOPE OF DELIVERY > D > GB > F > I > PL Scope of delivery Overview of the scope of Delivery 1 Basic device – PND (Personal Navigation Device) 2 USB connection cable 3 Unit holder with carrier plate (the design depending on the model) 4 Cable for power supply via the vehicle cigarette lighter (12/ 24 Volt) with integrated TMC-antenna (depending on the... -
Page 15: Overview Of The Navigation Device
OVERVIEW OF THE NAVIGATION DEVICE >>> > D > GB > F > I > PL Front of unit with controls and displays Overview of the navigation device 5 Rear of unit 1 Back button Press = Back function in most applications Press and hold = Open the main menu 2 Touch screen showing the main menu selected 3 Touch screen key... - Page 16 >>> OVERVIEW OF THE NAVIGATION DEVICE > D > GB > F > I > PL Underside of the unit Top of the unit 2 Slot for Micro SD card 1 ON/OFF switch 3 Mini USB connection / connection for power supply...
-
Page 17: Maintenance And Care 17 Operation
GENERAL OPERATION >>> Maintenance and care Your mobile navigation system was • Do not store your mobile navigation General operation designed and manufactured with great system in cold environments. During > D The unit is maintenance-free. care and should be treated with equal operation, when the unit warms up to For proper care, a commercially >... -
Page 18: Battery Quality Declaration 18 Calibration
>>> GENERAL OPERATION Battery quality declaration Display quality declaration Power supply > D The capacity of the rechargeable battery In some cases, for technical reasons, a Note: in your mobile navigation system few discoloured dots (pixels) may be > GB You can charge the Navigation device decreases with... -
Page 19: Using The Battery
GENERAL OPERATION >>> Using the battery Connection for the cigarette lighter The internal power supply is via the > D Note: integrated rechargeable battery. The If the cigarette lighter has recently been > GB rechargeable battery is maintenance- used and is still hot, wait until the lighter free and does not require any particular >... -
Page 20: Connection To The Mains Outlet
>>> GENERAL OPERATION TMC antenna (depending on the GPS antenna Connection to the mains outlet > D model) ¤ Danger! Unit antenna > GB The supplied TMC antenna is integrated Make sure that your hands are not wet The GPS antenna is integrated into the into the cable for power supply. -
Page 21: Cable For Vehicle Integration (Depending On Model, Optional)
GENERAL OPERATION >>> Cable for vehicle integration Memory card > D (depending on model, optional) Your Navigation device has a slot for a micro SD memory card. > GB With a 4-pin 2.5mm jack cable you can As the map data is stored in an internal integrate your Navigation... -
Page 22: Inserting The Memory Card
>>> GENERAL OPERATION Unit bracket Inserting the memory card > Remove the memory card from its > D The Navigation device can be attached packaging without touching or soiling directly to the windscreen with the unit > GB the contact bar. holder. -
Page 23: On The Windscreen
GENERAL OPERATION >>> On the windscreen The unit holder can be attached directly > D to the windscreen using the suction > GB mechanism. > Press the carrier plate onto the four > F retaining lugs of the unit holder. >... -
Page 24: Adjusting The Unit Holder's Position
>>> GENERAL OPERATION Switching the Navigation device Adjusting the unit holder’s position Switching on > Loosen the fastening screws > Press the button on the top of the > D on/off until the carrier plate can be Navigation device. > GB moved without using excessive force. -
Page 25: Switching Off
GENERAL OPERATION >>> > Press the button for the required Switching off > If you agree to the request contained in language. You can switch the unit off at any time. > D this prompt, press the button. > The selection is confirmed by pressing >... -
Page 26: Basic Information About The
>>> GENERAL OPERATION Basic information about the Basic information about the Operation When you touch a button on the touch > D touch screen menus screen, the button in question is briefly > GB The Navigation device is fitted with a shown outlined in red to confirm the During operations, you are assisted by touch screen. -
Page 27: Entries Made With The Entry Menu
GENERAL OPERATION >>> You can tell whether a telephone is If route guidance is already active, the Entries made with the entry menu already connected by the symbol on the current destination address and a button Some applications require entries to be >... -
Page 28: Entering Characters
>>> GENERAL OPERATION Entering characters Accepting proposals Scrolling through the lists Characters are entered by pressing the During entry, the Navigation device If you have already entered some of the > D keys in the central area. makes proposals in the uppermost line. letters of the selection you want, you can >... -
Page 29: Special Characters And Accent Marks
GENERAL OPERATION >>> The selection list appears. Other character sets Different character sets can be selected > D for the keyboard of the Navigation > GB device. > F > I > In order to switch to the special > Press the arrow keys on characters keyboard, press the button >... -
Page 30: Entering Numbers
>>> GENERAL OPERATION Entering numbers Switching between upper and lower case: Deleting characters Switch to the numbers keyboard in order During free text entry, it is possible to To delete the last character, use the back > D to enter figures. switch between upper/lower case and key. -
Page 31: The Back Button
GENERAL OPERATION >>> Radio remote control This unlocks the base plate, which can The back button now be removed. is integrated in the bottom left > D hand corner of the casing. Note: > GB It is not absolutely essential for the function of the Navigation device to >... -
Page 32: Removing The Remote Control
>>> GENERAL OPERATION Removing the remote control You can remove the remote control > D again, to change the battery for example. > GB > F > I > PL > Position the base plate so that the > Press the remote control onto the word UP is pointing in the direction of base plate. -
Page 33: Connecting The Remote Control To The Navigation Device
GENERAL OPERATION >>> > Remove the old battery and replace it Connecting the remote control to the Replacing the battery Navigation device with a new type CR2032/DL2032 Navigation device stops > D Connecting for the first time battery. responding to commands from the >... -
Page 34: Operating The Navigation Device
>>> GENERAL OPERATION When using the remote control and, Operating the Navigation device using Butto Basic function the remote control for example, using the control ring > D You can control most functions and the scroll through a menu, the active menu Starts up the voice entry. -
Page 35: Content Manager
GENERAL OPERATION >>> Content Manager > Click on Install to start the copying Installing the Content Manager procedure. Click on Details to see the You can install the Content Manager on > D The Content Manager is a PC-based details during copying. your computer with the following steps: application containing a number of >... -
Page 36: Starting The Content Manager
Starting the Content Manager computer. Manager with the version already Execute the following actions to start the > D > Select Becker installed. Content Manager: > GB Content Manager > Click on • If the new version is a critical update,... -
Page 37: Transferring Pictures
You can also try to find a solution to directories self-explanatory names so your problem in the FAQ in the Support that it is simpler to find these again, if area Becker homepage needed. (www.mybecker.com). Note: Never attempt to open the unit yourself. -
Page 38: Navigation Mode
>>> NAVIGATION MODE What is navigation? Signals from at least three satellites are Navigation Mode ¤ Safety instructions required to determine your position; > D The term "navigation" (lat. navigare = to • Road traffic regulations always take your height above sea level can be travel by sea) is generally understood to priority. -
Page 39: Selecting Navigation
NAVIGATION MODE >>> Selecting Navigation Note: > D Set current position The menu items Navigation mode is called up from the Select from last destinations (fast main menu. New destinations can be > GB access mode) can also be used to select New destination entered in the menu "... -
Page 40: Smart Guess
>>> NAVIGATION MODE Last destinations list The destination list The destination list displays, line by line, > D The last destinations visited and saved all destinations available for fast dialling. destinations are displayed in the Last > GB Each line of the destination list is divided destinations list and can be selected into two fields. -
Page 41: Icons Used
NAVIGATION MODE >>> Icons used Operating the last destinations list Displaying or editing a destination The following icons are used in the Any destination stored in fast access > D Start with existing destination destination list: mode can be displayed and edited. The existing destinations are listed in the >... -
Page 42: Personal Destinations
>>> NAVIGATION MODE Selecting a destination from Personal Option Meaning Option Meaning destinations > D Protect entry Delete all The destination is pro- All destinations (except ™ entries tected from automatic for the protected desti- You can call up Google points of inter- >... -
Page 43: Editing Personal Destinations
NAVIGATION MODE >>> Editing Personal destinations Selecting a destination from Contacts ® ® > In the list of your own destinations, You can call up Microsoft Outlook > D press the button in front of the contacts that have been imported into >... -
Page 44: The New Destination Menu
>>> NAVIGATION MODE 10 entries, a list of contacts is displayed The New destination menu straight away. > D > In the input menu, select the first > GB letters of the entry you are looking for. > Press the button when the name >... -
Page 45: Layout Of The New Destination Menu
NAVIGATION MODE >>> Layout of the New destination menu Select on map Entering the address With the button Select on map , you can Enter address button in the > D Enter address select a destination directly on the map destination input menu opens the menu The various steps from selecting an >... -
Page 46: Selecting A Country
>>> NAVIGATION MODE Selecting a country Selecting an address and starting route Note: You can select a country from those guidance > D If required, press the arrow keys available using the button for the country You can enter the exact destination or use the scroll wheel on >... - Page 47 NAVIGATION MODE >>> Selecting a town Using the town list Note: The destination can be entered by either Once a few letters of the desired town > D If two words need to be entered you using the name or ZIP code. have been entered you can display a list must separate them with the character >...
- Page 48 >>> NAVIGATION MODE Selecting the street Using the street list Selecting the Intersection In the Street menu field the street and Once a few letters of the desired street After entering the destination town and > D house number can be entered separate- have been entered you can display a list street, you can enter a junction so as to >...
- Page 49 NAVIGATION MODE >>> Selecting a house number Displaying the route Storing a destination After entering the destination town and Once the address has been entered, the In the address input menu, the Save > D street, you can enter a house number so address input menu allows the route to button opens a menu where a name can >...
- Page 50 >>> NAVIGATION MODE If the route guidance is already running Note: Note: and a waypoint has already been entered > D The symbols above the progress bar If there is no GPS signal when the route you will be asked whether the new refer to restrictions that you may have is calculated, the following will be >...
-
Page 51: Route Guidance
NAVIGATION MODE >>> If your entry is unique, after a short time Entering address by speech (selected models) You can start the spoken address entry the menu for entering addresses will be > D from the address entry menu by press- displayed with your entry filled in. -
Page 52: Points Of Interest
>>> NAVIGATION MODE If your entry was not unique or the Entries identified with the symbol Note: Navigation device was not able to open up a further list when they are > D You can only select points of interest in uniquely assign your entry, you will be selected. -
Page 53: Point Of Interest In The Vicinity
NAVIGATION MODE >>> > Select the desired point of interest. Note: > D All categories You can also press the button. An input menu will then open > GB and you can enter the name of a point of > F interest directly and confirm it. - Page 54 >>> NAVIGATION MODE available Points interest By pressing of the button next to Point of interest near to an address > Press POI near location categories for the city entered will be the selected POI, you can display the > D displayed.
- Page 55 NAVIGATION MODE >>> > Select the desired destination in the > Press the Start to begin route guidance Entering a point of interest directly > Press the POI search by name button. list. to the point of interest straight away. >...
-
Page 56: Additional Point Of Interest Information
>>> NAVIGATION MODE Additional point of interest information Marco Polo City Guides Selecting a destination from the map Any additional information that is The MARCO POLO travel guide is similar You may also select a destination directly > D provided for a point of interest can also to the function "Enter special destination"... - Page 57 NAVIGATION MODE >>> > Press the Select button. You can select a new destination by touching the map even during the route > D guidance in progress, in order to insert a > GB stopover replace destination. When touching the display, a >...
-
Page 58: Coordinate Entry
>>> NAVIGATION MODE > Then enter the desired values using Where possible, an address matching Coordinate entry the buttons the coordinates will be displayed. You You can also enter your destination using > D The entry field at the beginning may be can view the destination on the map, geographic coordinates. -
Page 59: Route Planning
NAVIGATION MODE >>> By pressing Add stage you can now add Route planning a stage to the route. The route planning menu allows you to > D After pressing Rename route you can create and select individual routes. To do >... -
Page 60: Simulation Of The Route
>>> NAVIGATION MODE You can call up the route options using Creating a new route Options button. > Drücken Sie in der Routenplanung die > D Create new route Taste > GB Simulation of the route There is a play button on the left >... -
Page 61: Editing A Route
NAVIGATION MODE >>> Editing a route Notice (depending on model): > Select the route you wish to edit. > D Here you can define a loading time. > Press the button in front of the This, in turn, has an impact on the calcu- >... -
Page 62: Optimising A Route
>>> NAVIGATION MODE Navigation settings Optimising a route Option Meaning If you have entered several destinations > D Move down The stage is moved The navigation settings contain all the for a route, you can use the Navigation backwards by one settings that are relevant to the >... -
Page 63: The Map View Button
NAVIGATION MODE >>> This will take you to the navigation > Press the button to select The Map view button settings menu. whether to use 2D or 3D mode. You can select whether the map is to be > D >... -
Page 64: Auto Zoom
>>> NAVIGATION MODE The following setting options are • Street names 2D Street names 3D available in the extended settings: You can select whether the street > D names should be displayed ( ) or not Auto zoom • > GB ) in 3D or 2D mode. -
Page 65: Select Poi Categories
NAVIGATION MODE >>> Auto zoom Select POI categories > Press the Auto zoom button in the You can select which POI symbols are to > D extended settings. be displayed on the map. > GB Select POI categories > Press the button in the extended settings. -
Page 66: 3D City View
>>> NAVIGATION MODE Under these options, you can select > Confirm your setting in the Advanced displays for the travel without a selected menu by pressing the button. > D route. Here you can only select between Note: > GB Speed, Speed limit, Time and Height. -
Page 67: The Route Overview Button
NAVIGATION MODE >>> The Route overview button The Guidance info button With the options in this setup menu you In the Guidance info settings window > D can select the Points of Interest to be select which additional > GB displayed and whether TMC reports are information you would like displayed displayed in the map view when pressing... - Page 68 >>> NAVIGATION MODE Setting Meaning Setting Meaning Note: Junction > D Signposts When this function is If this function is This information can only be displayed if view activated, you receive activated, you will see it is contained in the map material. >...
-
Page 69: The Route Options Button 69 > D
NAVIGATION MODE >>> The different profiles are displayed and The Route options button Selecting the vehicle profile (depending on you can select the desired profile by model) You can edit your driving profile in the > D This setting influences the calculation of pressing the appropriate button. -
Page 70: Truck And Mobile Home Functions
>>> NAVIGATION MODE The window for selecting the maximum Truck and mobile home functions (depending Notes: speed is displayed. on model) > D In the map display, roads are displayed You can select or set the vehicle profile. with a light red contour if no specific in- >... -
Page 71: Setting Truck Profiles
NAVIGATION MODE >>> You have different operation options in With the three saved truck profiles you Setting truck profiles the car or truck profile menus displayed. have the option to customize the truck > D Notes: You do not have any further setting op- symbol and name This function is only available with mod-... -
Page 72: Selecting Vehicle Category And Name
>>> NAVIGATION MODE Once you have made all the required set- Selecting vehicle category and name tings, confirm your settings by selecting Once you have changed one of the truck > D profiles, you have the option to enter the >... -
Page 73: Feedback After Route Calculation
NAVIGATION MODE >>> The following is displayed for each re- Feedback after route calculation Zooming in on the map When calculating the route, the best pos- striction: You can gradually zoom in and out of the > D sible route is selected by taking the vehi- A graphic for the restriction map using the Zoom buttons. -
Page 74: Warnings Without Planned Route
>>> NAVIGATION MODE described in the chapter "Feedback after Warnings without planned route Selecting the route type route calculation". When the driver warnings function is ac- > After pressing the Route type button, > D You have the following options: tivated in the navigation settings, you will select one of the following options. -
Page 75: Time-Dependent Route Guidance
NAVIGATION MODE >>> Time-dependent route guidance Avoiding particular types of road The TMC button If this function is switched on ( After pressing the button Avoid you can You can configure settings for the > D information (statistical information) on exclude various types of road, e.g. -
Page 76: The Voice Guidance Button
>>> NAVIGATION MODE • Volume The Voice guidance button Setting Meaning You can select the standard volume for In the Voice guidance settings window > D Rerouting This button allows you voice announcements for each start of you can make settings relating to the to choose whether the >... -
Page 77: Setting The Voice
NAVIGATION MODE >>> Setting the Voice Setting the Volume The Warnings button In the Voice settings window you can set With the Volume settings window, you In the Warnings settings window you can > D the voice that will make the navigation can set the standard volume for voice select which warnings are to be >... -
Page 78: Setting Driver Alerts
>>> NAVIGATION MODE • Driver alerts (depending on the • Truck Navigation (depending on mod- Setting Driver alerts model) el) ) If this information is saved in the map > D You can have signs displayed, for You can let yourself be warned about material and is supported by your >... -
Page 79: Setting Environmental Zones (Depending On Model)
NAVIGATION MODE >>> The following signs are available in the tively. By pressing the symbol with the Setting environmental zones (depending on individual categories: bell, you can set the audible warning sig- model) > D nal ( audible warning signal acti- Curve warnings •... -
Page 80: Setting Speed Info
>>> NAVIGATION MODE Setting Speed info Setting Meaning Speed info settings window allows > D Out of city Select the amount over to select whether speed limits are the speed limit at which > GB displayed in parallel to the navigation. you would like to receive You can also receive an audible warning an acoustic warning... -
Page 81: The Blocked Roads Button
NAVIGATION MODE >>> > Select the blocked road you want. You can now set whether or not the road The Blocked roads button should be blocked for each day of the In the Blocked roads settings window > D week. you can unblock previously permanently >... -
Page 82: The Vehicle Data Button
>>> NAVIGATION MODE The Vehicle data button Note: This menu allows the calculation of an > D Block 24 h Press the , button to set a > Press the Extra-urban button to enter economic route by using the fuel block for an entire day. -
Page 83: The Format Button
NAVIGATION MODE >>> If the automatic function is switched off, The Format button The Time button you can select the desired time zone by In the Format settings window you can You can select the time zone relevant for > D pressing the button below Use auto time Time... -
Page 84: Traffic Announcements Using Tmc
>>> NAVIGATION MODE Traffic announcements using The Reset button Note: You can reset the navigation settings to > D TMC (depending on the model) As the traffic announcements are their factory settings. transmitted by radio stations, we cannot > GB The settings will then be reset. -
Page 85: D (Depending On The Model)
NAVIGATION MODE >>> Displaying TMC messages on the map Using TMC Current TMC messages are displayed on When the Navigation device has been at- > D the map graphically. Sections of the tached to the carrier plate (power supply > GB route where there are traffic problems with the integrated TMC antenna con- are highlighted blue. -
Page 86: Reading A Message
>>> NAVIGATION MODE The part of the route with the travel Reading a message Taking announcements into direction > Press on the desired message in the consideration when calculating routes > D If a TMC message lies on your route, list. -
Page 87: The Map Display
NAVIGATION MODE >>> The red route or route marked blue for The map display an obstruction shows the previous route. > D The map display is used primarily for The route marked yellow displays the route guidance. However, you can also >... -
Page 88: Structure Of The Map Display
>>> NAVIGATION MODE The map display will then appear and, if Speed limit on the road currently Power level/telephone status being driven (display (depending on the model) GPS reception is available, will show > D available for all roads), signs for the your current position. -
Page 89: The Information Box
NAVIGATION MODE >>> Your current position is displayed on the If you press the Info box again, more or Information is also displayed in the map via the position icon. less fields are displayed. At least one bottom left corner in the preview area. >... -
Page 90: Split Screen With Route Guidance
>>> NAVIGATION MODE Split screen with route guidance Route guidance with arrow display Note: > D If you follow the lane recommendation, the next driving maneuver is possible > GB without changing lanes. > F Next driving maneuver > I Current street or street to which the next driving maneuver leads >... -
Page 91: Map Display With Junction View
NAVIGATION MODE >>> Traffic lane recommendation (only Map display with Junction view Tunnel view appears on some multi-lane roads; You can display a detailed and realistic When your enter a longer tunnel, a three > D green arrows = recommended view of the lane situation at many dimensional tunnel view appears. -
Page 92: Using The Map Display
>>> NAVIGATION MODE Using the map display Changing the announcement volume Note: The volume of announcements can be > D The tunnel view provides a schematic Repeating the last announcement adjusted. view of the route layout of the tunnel. During route guidance, the system >... -
Page 93: Map Zooming
NAVIGATION MODE >>> An x now appears next to the speaker Map zooming Moving the map symbol . With pressing the The map can be zoomed into in steps by You can move the map to any point. > D button, you can make the volume control using the zoom buttons. -
Page 94: Map Orientation
>>> NAVIGATION MODE The viewing angle will be lower and the Map orientation You can orient the map for example in When a route is activated, the map view horizon is moved back after a while into > D the direction of travel. can be oriented in different ways. -
Page 95: Situationscan
NAVIGATION MODE >>> number of TMC announcements and > Press the symbol. Note: POIs are displayed. A message is displayed with the > D If there is a traffic jam announcement > Press one or more buttons to display question "You are probably standing in a on the route, the TMC symbol >... -
Page 96: The Departure Assistant
>>> NAVIGATION MODE lot to the destination are governing for Map display options Note: the selection. > D The scope of the displayed functions In the map display options, you can > Touch a parking possibility on the map depends on whether route guidance or change the settings for route guidance, >... -
Page 97: Displaying The Whole Route
NAVIGATION MODE >>> touching the screen shortly, allow you to Displaying the whole route play the simulation in up to 16x speed, or (Only available when route guidance is > D to step from route section to route active.) > GB section. -
Page 98: Selecting Alternative Routes
>>> NAVIGATION MODE > Select Block for current route to block Selecting alternative routes Change route options the section of the route for the current You can have the different routes (Only available when route guidance is > D route guidance session only. displayed by the navigation device. -
Page 99: Canceling Route Guidance
NAVIGATION MODE >>> Canceling route guidance Entering/deleting a stopover (Only available when route guidance is (Only available when route guidance is > D active.) active.) > GB You can cancel the active route guidance. With this function, you can enter a >... -
Page 100: Blocking Route Temporarily
>>> NAVIGATION MODE a road length between 200m and 50km. Blocking route temporarily Setting day/night display As soon as you selected the stretch, a Using the Block road ahead option, you You can switch the Navigation device > D route will calculated. - Page 101 NAVIGATION MODE >>> number 112 (depending on model) if a at your disposal. Also see chapter "Tele- Displaying current position (Where am I?) mobile telephone is connected to your phone calls" on page 113. > D You can display your current position, navigation system and has reception.
-
Page 102: Entering The Destination
>>> NAVIGATION MODE Displaying/selecting different routes Entering the destination You can use the Navigation device to (Only available when route guidance is > D display various routes. not active.) > GB > With the entire route displayed, press You can enter a destination. Alternative button. -
Page 103: Skipping A Destination
NAVIGATION MODE >>> Skipping a destination If a planned route with several destina- > D tions is active, you may delete the cur- > GB rent destination of the route. Route guid- ance to the next destination is then > F started. -
Page 104: (Only Selected Models)
TELEPHONE MODE >>> If your navigation device has an Calling up the telephone mode If Bluetooth is activated and the Telephone mode integrated Bluetooth® interface, you can Navigation device is already connected > D (only selected models) connect it to a mobile phone equipped to a cell phone, the telephone menu is >... -
Page 105: Telephone Menu
>>> TELEPHONE MODE The Navigation device now attempts to Telephone menu (only selected In the upper area of the telephone menu, reconnect the cell phone last connected. the signal strength of the cell phone, the > D models) When the connection is established, the charging level of the cell phone, the tele- >... - Page 106 TELEPHONE MODE >>> > In the telephone menu, press the Dial Phonebook Note: In the phonebook, the system displays button. > D the phonebook entries loaded from the Press the button to delete the > GB SIM card and from the memory of the characters entered.
- Page 107 >>> TELEPHONE MODE > In the input menu, select the first Note: Icon Meaning letters of the entry you are looking for. > D You may also first have a list displayed Private phone number Note: that corresponds letter > GB •...
-
Page 108: (Only Selected Models)
TELEPHONE MODE >>> • Call back Text messages (SMS) By pressing the Call back button you (only selected models) > D can start a call to the sender’s number. If this function is supported by the mobile > GB Extract numbers •... -
Page 109: Incoming Text Message
>>> TELEPHONE MODE Each line of the number list is divided into Incoming text message Number lists You will receive notification of any text two fields. Each list field is designed as a In the number lists, the phone numbers >... -
Page 110: Scrolling In The Number List
TELEPHONE MODE >>> Icons used Dialing an available number Selection Meaning The following icons are used in the You may select directly the numbers/ > D Protect entry The entry is protected number list. names available in the number list. against automatic dele- >... -
Page 111: Lists Loaded From Cell Phone
>>> TELEPHONE MODE The device list shows line by line all cell Lists loaded from cell phone Connecting Bluetooth telephones > In the number list, call the respective phones that were already connected to So that you may make and receive calls >... -
Page 112: Automatic Connection
TELEPHONE MODE >>> Automatic connection Searching for cell phones After activation, your Navigation device > D Note: attempts to establish a connection to the Prior to a search, switch on Bluetooth® > GB cell phone last connected. on the cell phone to be searched for. Note: >... -
Page 113: Connecting From Device Lists
>>> TELEPHONE MODE Connecting from device lists Connecting a mobile phone From the device list, you may initiate a You can also attempt to establish a > D connection to a cell phone. If a cell phone connection to the Navigation device from >... -
Page 114: Disconnecting A Connected Telephone
TELEPHONE MODE >>> Telephone calls Disconnecting a connected telephone Accepting a call You may disconnect the connection to a For an incoming call, a ringing tone will > D In the telephone calls section, you can cell phone currently connected via sound. -
Page 115: During A Call
>>> TELEPHONE MODE If you have switched on the automatic Ending a call During a call call acceptance described You can end an active call. During a call, you have various control > D "Automatic call acceptance" on page 117, options. -
Page 116: Telephone Settings
TELEPHONE MODE >>> > To call the options menu of the call • Private mode Hands free Telephone settings screen, press the Options button. You can transfer a call back to the cell > D The telephone settings include all the phone. -
Page 117: Switching Bluetooth On And Off
>>> TELEPHONE MODE You will branch to the menu for the • Bottom icon: function off Switching Bluetooth on and off telephone settings. With the Bluetooth button, you can > D switch Bluetooth on or off. Visibility > GB Start Visibility With the button, you can switch... -
Page 118: Automatic Call Acceptance
TELEPHONE MODE >>> Automatic call acceptance Telephone volume Updating the phonebook With this function, you can set whether With this function, you can set the With this function, you can update or > D or not or after which time an incoming volume of the ringtone and the volume retransfer the stored phonebook entries >... -
Page 119: Bluetooth Name
>>> TELEPHONE MODE • Read out automatically Bluetooth name Text message notification (depending An incoming text message will be read on the model) With this function, you can assign a > D out automatically. name for your Navigation device. This With this function you can set how the >... -
Page 120: Marco Polo City Guides
TOOLS >>> Under Tools, the following functions are Image viewer* Tools grouped together, depending on the > D model: Note: > GB • Marco Polo City Guides The image viewer cannot be called up • Image viewer when route guidance is active. >... -
Page 121: The Image Viewer Menu
>>> TOOLS The image viewer menu Selecting an image In the image viewer menu, you can > D select images, start a slide show and call > GB up the settings. > F > I A message is displayed stating that the image viewer must not be used when >... -
Page 122: Enlarging The Image
TOOLS >>> Press the buttons to the left and right of Enlarging the image Displaying image information the image to move to the next or > Show the image menu. > Show the image menu. > D previous image. > Press the Zoom button. -
Page 123: Where Am I
>>> TOOLS Slide show Traffic forecast (depending on model) In the slide show, all the pictures in the With the traffic forecast, you can observe > D current folder level are automatically the expected flow of traffic. > GB displayed sequentially. The data is based on historical traffic Slide show >... -
Page 124: Country Information
TOOLS >>> • With the buttons you Country information can change the section of the > D The country information enables you to map. display country-specific information for > GB numerous countries (maximum permit- • With the button you can >... - Page 125 >>> TOOLS Blocking a section of the road The points will be marked by the letters Symbol Meaning A and B. > D permanently Speed limit in built-up areas > Define the direction of blockage for the > GB road section (from A to B or from B With the Block option you can block indi- to A).
- Page 126 TOOLS >>> > Using the buttons set the first peri- Trip computer (depending on od when the road is to be blocked on > D model) this day. > GB > Using the buttons set the second The Trip computer provides a data period when the road is to be blocked display with average speeds, maximum >...
- Page 127 >>> TOOLS Travel time without breaks in the Press the Stop button to stop the journey recording. The time continues if you > D Travel time with breaks in the press the Start button again after journey > GB stopping the recording. Compass Reset Press the...
-
Page 128: The System Settings Menu
SETTINGS >>> Selecting system settings Settings The system settings menu Operation You can select the various settings > D You can change various basic settings Selection options optionsfrom the system settings menu. for all applications on the Navigation Select the desired menu item by press- >... -
Page 129: The Individual Menu Items
>>> SETTINGS The individual menu items Automatic on/off The Navigation device can switch > D Battery automatically to sleep mode when the Your Navigation device may be operated > GB vehicle ignition is switched off. using an external power supply unit or Prerequisite for this: >... -
Page 130: Day/Night Display
SETTINGS >>> • Bottom icon: The function is switched Day/night display Brightness off, the Navigation device does not You can set the Navigation device display You can set the brightness of the display > D switch off automatically. to day, night or automatic. separately for day and night display. -
Page 131: Design By Day
>>> SETTINGS > Confirm your selection by pressing the Design by day Design by night With this option, the menu and map Two schemes with different contrasts back button . The new night > D display during the day can be switched to are available to select for the map display will take effect when activating >... -
Page 132: Setting The Colour
SETTINGS >>> Scrolling Setting the colour Language You can change the colour of the icons The texts on the touch screen can be Using the buttons or the scroll > D and other design elements. displayed in a variety of languages. wheel, it is possible to scroll through the >... -
Page 133: Sounds
>>> SETTINGS Sounds Renaming driver profile You can switch the Navigation device > D signal tone on and off. This also includes > GB the clicking of the touch screen buttons. Tones > Press the button. > F Depending on the previous setting, the signal tones are switched on or off. -
Page 134: Deleting Driver Profile
> Press the button. such as used licences, installed contents The Navigation device is reset to the and map material. Always quote these factory settings. details in enquiries to the service provid- ed by Harman/Becker. -
Page 135: Calibration
>>> SETTINGS Calibration If the touch screen responds incorrectly > D when buttons are pressed, it needs to be > GB calibrated. > F Starting the calibration You can start the calibration using the > I following button: > PL >... -
Page 136: Technical Terminology
TECHNICAL TERMINOLOGY >>> JPG/JPEG Technical terminology (Greenwich Mean Time) (Global Positioning System) (Joint Photographic Experts Group) > D Central European Time standard GPS determines your actual geographi- The JPEG is the most common type of > GB Standard time at 0 degree longitude (the cal position by the use of satellites. - Page 137 >>> TECHNICAL TERMINOLOGY Stylus A stylus is an input pointer which is used (Traffic Message Channel) > D for the operation of touch-screens, mo- Traffic announcements transmitted by > GB bile phones or PDAs. most FM stations via RDS. Basis for The stylus consists basically of a plastic dynamic navigation.
-
Page 138: Index
index INDEX >>> Content Manager ....35 Numerics Start ......36 3D display . -
Page 139: Number List
>>> INDEX Microphone on/off ....115 Motorways ..... . . 75 ID3 tag . - Page 140 INDEX >>> settings Navigation ....62 Units ......83 >...
-
Page 141: Model Overview And Technical Specifications
>>> MODEL OVERVIEW AND TECHNICAL SPECIFICATIONS Model overview and technical specifications : standard Navigation system > D - : not available Ready 45 Ready 45 : optional Ready 45 SE Active 45 > GB EU19 > F Weight 149 g 149 g 149 g 162 g... - Page 142 NOTICE >>> Dear customer, NOTICE In conformance with current EC guidelines, any person may operate this unit. This unit > D conforms to the current valid European or harmonized national regulations. This > GB designation is your guarantee that the unit conforms to the applicable specifications concerning electromagnetic compatibility.
- Page 143 >>> NOTICE Disposal of the unit > D Customer information on the disposal of electrical and electronic devices (private households) > GB According to the self-proclaimed corporate principles of United Navigation GmbH, your > F product has been developed and manufactured from high-quality, recyclable materials and components.
- Page 144 NOTICE >>> Disposal of the battery > D Duty to supply information according to battery legislation (BattV) > GB Batteries must not be disposed of in household waste. It is the duty of the user to return used batteries. Please only dispose of >...
- Page 145 >>> NOTICE > D > GB > F > I > PL > Completely discharge the battery (leave the unit switched on with no power supply until it automatically switches off). > Unscrew and remove the housing screws using a small TX5 screwdriver. >...
- Page 146 - Germany...
Need help?
Do you have a question about the READY 45 LMU and is the answer not in the manual?
Questions and answers