Points Of Interest - Becker MAP PILOT Operating Manual

If your entry is unique, after a short time
the menu for entering addresses will be
displayed with your entry filled in.
If the address displayed does not match
the address you said, you can make appro-
priate changes.
If the address is correct, you can start
route guidance, display the route or store
the address as described on page 23.
If your entry was not unique or the
Becker® MAP PILOT was not able to
uniquely assign your entry, you will be
shown appropriate lists. You can then se-
lect the address you want from these lists.
Depending on your entry, lists with city
names, lists with street names or com-
bined lists with city and street names can
be displayed.
The following example shows a list in
which a city can be selected.
Entries identified with the
open up a further list when they are select-
ed. This can be necessary if, for example,
the same city name occurs a number of
times in the set country.
Once you have selected the city or street
you want in the lists, the menu for enter-
ing addresses is displayed after a short time
with your entry filled in.
You can then start route guidance, display
the route or store the address as described
on page 23.
NAVIGATION MODE

Points of interest

Points of interest (POI for short) include
airports and ferry ports, restaurants, ho-
tels, petrol stations, public buildings. You
can use points of interests as navigation
destinations.
> Select
Enter point of interest
destination input menu.
symbol
The POI menu appears.
You can choose between
• a point of interest nearby,
• a point of interest near an address,
• a point of interest near a destination, or
• entering a point of interest directly.
>>>
> D
> GB
> F
from the > I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
25