Stopping Navigation; Destination: Points Of Interest Select - Becker TRAFFIC ASSIST PRO Operating Instructions Manual

Navigational mode
Starting navigation
The Start button can be used to start navi-
gation straight away. All the data entered
so far is processed in the route calculati-
on.
6058
Press the Start key to start navigation.
!
The route is calculated. The map display
then appears and directions to the desti-
nation begin.
42

Stopping navigation

There are three ways in which you can
stop directions to the destination.
Press the map display.
!
Press the Main menu key.
!
Press the 602 key to confirm that you
!
want to stop.
or
! Press the map display.
Press the Quit navigation key.
!
! Press the 602 key to confirm that you
want to stop.
or
Press the back key.
!
Press the key to confirm that you
! 602
want to stop.

Destination: Points of interest select

Points of interest, or POI for short (Point
of Interest), are included in the map and
can be displayed on the map. Points of
interest include airports and ferry termi-
nals, restaurants, hotels, petrol stations,
public buildings etc. Points of interests
can be used as navigational destinations.
Note:
Points of interest from the present sur-
roundings can only be selected if the re-
ception is good enough to locate their
position.
You can select between:
• a nearby destination,
• a nationwide destination and
• a destination in a town.
6004
Press the Point of interest key to display
!
the points of interest.