Accessories; Mains Charger; External Gps Antenna; Headset - Becker TRAFFIC ASSIST PRO Operating Instructions Manual

Table of Contents

Advertisement

Accessories

mains charger

This power supply allows connection of
the Traffic Assist Pro to a mains outlet
(not included in standard equipment).
Please consult your
local specialist dealer.
Requirements for power supply:
Alternating current
• 100-240 V
0.5 Amps
• 50-60 Hertz

External GPS antenna

Vehicles with limited GPS reception can
be fitted with an external antenna (not
included in standard equipment) to im-
prove the reception. Please consult your
local specialist dealer.
10
Note:
The integrated GPS antenna is not
suitable for use in vehicles with anti-
glare windows (metalised thermo-glass
or metal foil, indicated by the window
label - SIGLA SOL, SIGLA CHROM,
SIGLA, KOOL-OF, SUNGATE, etc.)
and vehicles with fine-meshed heating
wires in the windows.
If this is the case, use an external GPS
antenna. Please consult your local
specialist dealer.

Headset

When using the Traffic Assist Pro as an
MP3 player, commercially available
headphones with a 3.5 mm jack or adap-
ter can be connected (not included).
Danger!
Headsets must not be worn during tra-
vel. Observe national regulations and
legislation on this matter.
When using the headset, lower the vo-
lume so that your hearing is not dama-
ged.
Information about
documentation

Quick start guide

The Quick Start Guide is designed to
provide a brief introduction to operating
your Traffic Assist Pro. The most impor-
tant basic functions of the Traffic Assist
Pro are explained in the Quick Start Gui-
de.

Operating instructions

A comprehensive explanation of the
Traffic Assist Pro functionalities is con-
tained in these operating instructions.

Maintenance and care

Note:
Do not use aggressive or abrasive
agents or cloths which will scratch the
surface.
The unit must not be sprayed with wa-
ter.

Advertisement

Table of Contents
loading

Table of Contents