Automatic On/Off; Sounds; Factory Settings - Becker Traffic Assist Z 102 Operating Instructions Manual

>>> SETTINGS

Automatic on/off

The Traffic Assist can switch automatical-
> D
ly to sleep mode when the vehicle ignition
> GB
is switched off.
Prerequisite:
> F
• The Traffic Assist must be connected to
> I the vehicle cigarette lighter (see also
page 17).
> E
• The cigarette lighter is de-energized af-
ter the ignition is switched off.
> P
• The relevant function can be switched
> NL
on at the Traffic Assist.
> DK
Switching the function on / off
> S > Press the
Automatic on/off
Depending on the previous setting, the
> N
function will be switched on or off. The
current setting is shown by the icon.
> FIN
> TR
> GR
• Left icon: The function is switched on,
the Traffic Assist switches off automati-
> PL
cally.
> CZ
• Right icon: The function is switched
off, the Traffic Assist does not switch off
> H
automatically.
> SK
74

Sounds

You can switch the Traffic Assist signal
tone on and off. This also includes the
clicking of the touch screen buttons.
> Press the
Tone on
Depending on the previous setting, the
signal tones are switched on or off.
• Left icon: Tones switched on
• Right icon: Tones switched off
button.

Factory settings

You can reset your Traffic Assist to the
factory settings.
This deletes the following amended data:
or button. Stored destinations, stored routes, the
Tone off
home address, images, videos etc. stored
in the internal memory.
> Press the
> Press the
The Traffic Assist is reset to the factory
settings.
button.
Factory reset
button.
Yes