Table of Contents
Advertisement
9021
The energy supply and status are shown
on a display.
9021
Ending the status display
By pushing the button OK the status dis-
play is ended and the setting menu ap-
pears.
Brightness
The following button allows switching
between the maximum and minimum
brightness of the screen.
9030
9024
Push the button Brightness.
!
The brightness of the screen display
changes to the other brightness level.
The icon of the active settings is empha-
sised.
• Icon Day: maximum brightness
• Icon Night: minimum brightness
You can also adjust the brightness by
pressing the Brightness fast access but-
ton (See page 13.).
Calibration
If the touch-screen reacts incorrectly
to the touching of the screen in specific
areas, calibration is required.
The calibration procedure ends auto-
matically once all items are pressed. The
Settings menu appears. The touch screen
should now function more accurately.
Starting calibration
The calibration can be started using the
following button.
9025
Push the button Calibration.
!
The calibration process is started.
Various positions on the screen are indi-
cated in sequence by cross-hairs. Touch
this position as accurately as possible.
After all the positions have been touched
the calibration process finishes automat-
ically. The setting menu appears. The
touch-screen should now operate exact-
ly.
Settings
75
Advertisement
Table of Contents
