Automatic Connection; Automatic Call Acceptance; Telephone Volume - Becker Ready 50 Operating Manual

>>> TELEPHONE MODE

Automatic connection

With the Auto-connect
> D
switch on or off whether an automatic
> GB
connection to a cell phone is attempted
after switching on the Navigation device.
> F
> In the settings menu, press the
> I
connect button.
Depending on the previous setting, you
> PL
can switch the function on or off.
• Top icon: function on
• Bottom icon: function off
120

Automatic call acceptance

button, you can With this function, you can set whether
or not or after which time an incoming
call is accepted automatically.
Auto-
> In the settings menu, press the
accept call
> Select whether incoming calls will be
accepted automatically after 3, 5 or 10
seconds.
If you select
off.
The setting
indicated with a checkmark (
> Confirm your settings by pressing the
back button
Auto-
button.
Off
, the function is switched
currently selected is
).
.

Telephone volume

With this function, you can set the
volume of the ringtone and the volume
of the call.
> In the settings menu, press the
Volume button.
> Select the desired volume with the
and buttons.
Mute
> Press the button to mute the
volume. By pressing the
again, the telephone volume is
switched back on.
> Confirm your settings by pressing the
back button .
button