The Route Overview Button; The Guidance Info Button - Becker Ready 50 Operating Manual

The Route overview button

With the options in this setup menu you
can select the Points of Interest to be
displayed and whether TMC reports are
displayed in the map view when pressing
the Route overview button.
> Activate the option All Destinations.
The Route Overview displays the Points
of Interest selected in the POI Categories
menu. The display is recalculated every
two minutes.
> Activate the option TMC On Route.
The Route Overview in the map view
displays TMC announcements.
> Press the Select POI Categories button.
The Select POI Categories window is
opened. Three point of interest catego-
ries can be selected.
If you touch the preset option of one of
the POI Categories (POI 1, 2 and 3), a
selection list with 20 POI types appears.
NAVIGATION MODE

The Guidance info button

In the Guidance info settings window
you can select which
information you would like displayed
during route guidance.
Guidance info
> Press the button in the
settings menu.
The Guidance info settings window
appears.
The following settings are available:
Setting Meaning
Lane info
When this function is
enabled, a small arrow
indicates which lane
you should move into
in the case of multi-
lane roads.
>>>
> D
additional
> GB
> F
> I
> PL
67