Becker Ready 50 Operating Manual page 57

> Press the desired point lightly on the
surface of the screen.
A flashing red cross will be displayed at
this point.
Note:
GPS Position
By pressing the
display your current position again.
> Press the Select
Where available, the address of your
chosen point is displayed.
> Press the Start
guidance to the destination straight
away.
you can
You can also search for points of interest
in the vicinity of your chosen point using
the POI nearby button.
However, you can also store your
chosen point in fast access mode (
or display the route to the point of
interest ( Show route
button. You can select a new destination by
touching the map even during the route
guidance in progress, in order to insert a
stopover
destination. When touching the display, a
compass appears with arrows to adjust
the horizontal display and the vertical
display angle of the map. This function is
described on page 96.
button to begin route
Save
)
).
NAVIGATION MODE
or to replace the old
>>>
> D
> GB
> F
> I
> PL
57