Simulation Of The Route; Creating A New Route - Becker Ready 50 Operating Manual

>>> NAVIGATION MODE
> D
> GB
> F
> I
> Select the start point or your current
> PL
position as the start point for route
guidance.
Note:
If a start point is selected, this is only
used to view a route.
The individual stages are calculated.
A map of the stages will then be
displayed.
> Press the
guidance for this route.
60
You can call up the route options using
the

Simulation of the route

There is a play button
under the map, used to start a simulation
of the route.
If you touch the display after starting, a
control bar is displayed at the top with
control buttons for the simulation. You
can pause the simulation with the
button, and continue it with the
button. The
forward the simulation by a 16x speed.
You can move from route section to
route section with the
buttons.
If there is no further action, the control
bar disappears after a few seconds.
Start
button to start
Options button.
on the left
button allows you to fast
and

Creating a new route

> Drücken Sie in der Routenplanung die
Taste Create new route .
You can now enter an intermediate des-
tination as described under "The New
destination menu" on page 44 (
dress , Select from last destinations, Se-
lect Point of Interest , Marco Polo City
Guides, Contacts, Personal destina-
tions Select on map Enter geo-coor-
, or
dinates
). You also have the option of
quickly selecting a destination using the
Select from last destinations
> In the input menu, press the
to accept the relevant intermediate
destination.
Enter ad-
button.
OK button