Setting Environmental Zones (Depending On Model); Truck Warnings (Depending On Model); Setting Speed Info - Becker Ready 50 Operating Manual

Setting environmental zones (depending on
model)
You can let yourself be warned about en-
vironmental zones provided that this in-
formation is saved in the card material
and is supported by your navigation sys-
tem. This function can be activated
deactivated . By pressing the symbol
with the bell, you can set the audible
warning signal ( audible warning
signal activated).
> Confirm your settings by pressing the
button.

Truck warnings (depending on model)

You can let yourself be warned about en-
vironmental zones provided that this in-
formation is saved in the card material
and is supported by your navigation sys-
tem. The function can be adjusted sepa-
rately for journeys with and without ac-
tive navigation. The function can be
activated or deactivated
tively. By pressing the symbol with the
bell, you can set the audible warning sig-
nal ( audible warning signal acti-
vated).
> Confirm your settings by pressing the
button.
or
respec-
NAVIGATION MODE

Setting Speed info

The Speed info settings window allows
to select whether speed limits are
displayed in parallel to the navigation.
You can also receive an audible warning
about exceeding the speed limit.
Note:
This information can only be displayed if
it is contained in the map material.
¤
Risk of accident!
The information in the map material
may be incorrect as a result of short-
term changes (road works, for
example).
The traffic situation and the local road
signs take precedence over the
navigation system information.
Warnings
> In the settings window,
press the Speed info button.
The Speed info settings window
appears.
>>>
> D
> GB
> F
> I
> PL
81