Entering The Destination Bluetooth; Skipping A Destination - Becker Ready 50 Operating Manual

Entering the destination
(Only available when route guidance is
not active.)
You can enter a destination.
> Call up the options menu for the map
display.
> Press the Enter destination
You can now enter a destination as
described under "The New destination
Home
menu" on page 44 (
address Select Point of
,
Personal destinations Contacts
,
planning Select on map
, or
coordinates
).
Displaying/selecting different routes
You can use the Navigation device to
display various routes.
> With the entire route displayed, press
Alternative
the
can also be selected in the options of
the map display, See "Map display
button.
options" on page 99.
After a short time, the map is displayed.
Each route is calculated after each other
and displayed on the map.
Enter
,
Interest
,
Route The area on the right-hand side shows
,
Enter geo- the colour key for the individual routes,
the mileage for each route and the
estimated driving time.
You can select the desired route by
pressing the buttons on the right.

Skipping a destination

If a planned route with several destina-
tions is active, you may delete the cur-
rent destination of the route. Route guid-
button. This function
ance to the next destination is then
started.
This may be necessary if a destination
was not driven to directly. The Navigation
device otherwise tries to guide you to the
current destination.
> Call up the options menu for the map
display.
> Press the
Route guidance to the next destination is
started.
NAVIGATION MODE
Next destination
button.
>>>
> D
> GB
> F
> I
> PL
105