Becker Ready 50 Operating Manual page 100

>>> NAVIGATION MODE
touching the screen shortly, allow you to
play the simulation in up to 16x speed, or
> D
to step from route section to route
> GB
section. The simulation can be stopped by
pressing the back
> F
Route description
> I
> When the whole route is displayed,
> PL
press the Sections
The first point of the route description is
displayed on the map.
You can scroll through the whole route
description with the
buttons.
You can also display a list version of the
route description. For this press the
view
button. The simulation is continued
by pressing the
100
button.
> Press the
button.
If you press an entry in the route
description, it is displayed on the map.
Blocking route sections/roads
You can block individual route sections/
roads. The Navigation device then calcu-
lates a sensible diversion to avoid the
blocked section.
Use the
directions to select the section of the
Next Back
and
route to be blocked.
Press the
List
Resume
button.
arrow keys on
the right hand side of the screen to
scroll through the list.
and buttons in the route
Block
button.
> Select Block for current route
the section of the route for the current
route guidance session only.
Note:
If the route section is more than 10 kilo-
metres long, you can choose, in another
menu, whether to block the entire sec-
tion or just part of it.
Block permanently
> Select
section of the route for future route
guidance sessions too.
Changing of the blocking times is descri-
bed on page 129.
to block
to block the