Pip Link Operation - FOLSOM ScreenPRO FC-0608 Installation And Operator's Manual

PIP LINK Operation

PIP Link allows a user to select several destinations and LINK them together. By doing so, any source can then be
selected and moved or sized as if the linked destinations were one output. This feature is useful when creating butted
or seamless projected images. PIP Link can be used to accomplish two types of effects. The first involves placing a
PIP across two screens as shown in the example below for Screens 1 and 2. The second effect allows a single
source to be sized to fill those destinations that are linked, effectively creating a background, which you can place
other images over. All PIP Link activities are performed in the Preview Monitors. Once a "look" has been created,
simply Learn a Preset and all settings relating the desired "look" will be saved for later recall.
NOTE: When referring to the "Butted Images" diagram below, be aware of the following. Since there are two scalers
per screen, a PIP across a screen boundary uses all 4 scalers available. Consequently, PIPs can't exist across
Screens 1 and 2 as well as Screens 2 and 3 at the same time. However, you can place a PIP in Screen 3 provided it
does not cross the boundary.
Butted Images
1
Seamless Images
1
To Create a Link:
1) Select the Destinations to be linked.
2) Press the PIP Link button.
3) A single PIP will appear in the center of the linked screens.
4) The X and Y-axis of the Joystick will move the image Horizontally and Vertically. The Z-axis of the
Joystick will size the image to less than or greater than full screen.
The VFD will show the SIZE, V-CENTER and H-CENTER of the linked PIP in terms of percentages. If for example,
screens 1, 2 and 3 were selected to be Linked, when H-CENTER and V-CENTER are 0.0%, this point refers to the
exact center of Screen 2. A SIZE of 100% will make the image fill all three screens completely. Please note that when
adjusting SIZE, proper aspect ratio is maintained. Therefore, your image will be cropped vertically as the picture
begins to fill the linked screens. However, you can still move the image horizontally or vertically if you wish to look at
certain portions of the image.
Manual #26-0111200-00 / Revision E
2
2
Blended Blended
Region Region
One PIP and a Background
3
possible with this
configuration.
PIP image across Screens 1
and 2 are using two scalers
simultaneously.
Second PIP possible if
contained entirely within
Screen 3
One PIP and a Background
3
possible with this
configuration.
PIP image across Screens 2
and 3 are using two scalers
simultaneously.
Blended Region made
possible with the use of the
BlendPro system. Contact
factory for details.
ScreenPro Multi-Screen Remote 36