Configuration Keypad - FOLSOM ScreenPRO FC-0608 Installation And Operator's Manual

CONFIGURATION KEYPAD

This section describes the operations performed with the Configuration Keypad. These operations involve menus
displayed on the VFD display. In many cases, the joystick is used to adjust menu items in addition to the keypad
controls. The following keys are on the configuration keypad:
INPUT
o
OUTPUT
o
SYSTEM
o
FILE
o
SAVE
o
CANCEL
o
+/ON
o
-/OFF
o
RIGHT Arrow
o
LEFT Arrow
o
UP Arrow
o
DOWN Arrow
o
The following four sections: INPUT, OUTPUT, SYSTEM and FILE describe the operations associated with the
configuration keypad.
Manual #26-0111200-00 / Revision E
Configuration
INPUT OUTPUT
- / OFF
- Displays the INPUT configuration menu on the VFD display
- Displays the OUTPUT configuration menu on the VFD display
- Displays the SYSTEM configuration menu on the VFD display
- Displays the FILE configuration menu on the VFD display
- Saves the configuration changes to non-volatile memory
- Cancels changes made before the last save
- Increment or enable a menu item selection
- Decrement or disable a menu item selection
- Right Arrow used to navigate to the next lower menu
- Left Arrow used to navigate to the previous menu
- Used to navigate to a previous menu item selection within a menu
- Used to navigate to the next menu item selection within a menu
SYSTEM FILE
+ / ON CANCEL
SAVE
ScreenPro Multi-Screen Remote 15