Output Configuration - FOLSOM ScreenPRO FC-0608 Installation And Operator's Manual

Output Configuration – Configuration Keypad OUTPUT Key
Output Configurations are selected for each screen output. Changes are automatically saved to non-volatile memory.
OUTPUT SCREEN
Use the +/ON key or -/OFF key to select the output screen you wish to adjust.
OUTPUT FORMAT
Use the +/ON key or -/OFF key to scroll through the available output resolutions:
640x480
o
800x600
o
1024x768
o
1024x768 II
o
1280x1024
o
1280x1024 II
o
1280x720
o
1280x960
o
1280x768
o
1365x768
o
1365x1024
o
Note: 1280x960, 1280x1024, 1280x1024 II and 1365x1024 are not available when the frame rate is set to 75Hz.
Only 1280x768 is available when the frame rate is set to 60Hz.
OUTPUT FRAME RATE
Use the +/ON key or -/OFF key to scroll through the available output selections: 59.94Hz, 50Hz, 75Hz and 60Hz.
To eliminate the potential for frame rate artifacts, it is recommended that the output frame rate be set to match the
input frame rate for video sources (59.94Hz for NTSC, 50Hz or 75Hz for PAL).
OUTPUT OUTPUT SYNC
Use the +/ON key or -/OFF key to scroll through the available program sync output selections:
Comp
o
+H+V
o
+H-V
o
-H+V
o
-H-V
o
OUTPUT MONITOR SYNC
Use the +/ON key or -/OFF key to scroll through the available preview sync output selections:
Comp
o
+H+V
o
+H-V
o
-H+V
o
-H-V
o
Manual #26-0111200-00 / Revision E
OUTPUT CFG
SCREEN
FORMAT
FRAME RATE
OUTPUT SYNC
MONITOR SYNC
TEST PATTERN
DISPLAY LOCK
WIDE-SCN RASTER OFF
®
(Supports Samsung 's SyncMaster™ 151 Series LCD Monitors)
®
(Supports Hitachi LCD monitors)
(When used at 60Hz, supports Pioneer
#
####x####
##.##
+H+V
+H+V
OFF
®
Plasma Displays)
ScreenPro Multi-Screen Remote 22