FOLSOM ScreenPRO FC-0608 Installation And Operator's Manual page 23

INPUT ADVANCED H TOTAL
This menu field displays the total number of pixel clock periods during a horizontal line. The parameter is
automatically loaded when the Auto Config process is complete. Manual adjustments can be made with the
-/OFF or +/ON keys.
INPUT ADVANCED POS (R)
This menu field displays the number of clock intervals assigned to the horizontal front porch. The parameter
is automatically loaded when the Auto Config process is complete. Manual adjustments can be made with
the -/OFF or +/ON keys. Adjustments should be made to move the right edge of the image to the desired
location.
INPUT ADVANCED WIDTH (L)
This menu field displays the number of clock intervals assigned to the horizontal active area. The parameter
is automatically loaded when the Auto Config process is complete. Manual adjustments can be made with
the -/OFF or +/ON keys. Adjustments should be made to move the width of the image to the desired size.
INPUT ADVANCED TOP EDGE
While in the Advanced menu, a user can make vertical adjustments to the image. Use the Y-axis of the
joystick to place the edge of the image in the desired location.
INPUT ADVANCED BOTTOM EDGE
While in the Advanced menu, a user can make vertical adjustments to the image. Use the Y-axis of the
joystick to place the edge of the image in the desired location.
INPUT RAS TOPLFT
Use the joystick Y-axis to position the upper and left edges of the image to the Aspect Ratio box. Y-axis controls
vertical movement and X- axis controls horizontal movement. The image is positioned on the Preview monitor of
Screen 1.
INPUT RAS BTMRGT
Use the joystick Y axis to position the lower and right edges of the image to the Aspect Ratio box. The image is
positioned on the Preview monitor of Screen 1.
INPUT BRIGHTNESS
Turn the joystick control clockwise to increase brightness and counterclockwise to decrease brightness. The keypad
-/OFF and +/ON keys can also be used. The changes to the image can be seen on the Preview monitor of Screen 1.
The brightness level will be displayed on the VFD display. To quickly reset Brightness to 100%, press the -/OFF key
on the keypad with the +/ON key.
INPUT CONTRAST
Turn the joystick control clockwise to increase contrast and counterclockwise to decrease contrast. The keypad -/OFF
and +/ON keys can also be used. The changes to the image can be seen on the Preview monitor of Screen 1. The
contrast level will be displayed on the VFD display. To quickly reset Contrast to 100%, press the -/OFF key on the
keypad with the +/ON key.
INPUT INPUT TYPE
This menu item will override the default input video type selected by the system. Use the +/ON or -/OFF keys the
keypad to scroll through the most common settings: RGB, Beta50, Beta60, MII, EBU, COMP, Svid. The selected
setting will be updated on the VFD display. As the setting is changed, you will see the change on the image displayed
on the Preview 1 output.
INPUT INPUT SYNC
This menu item will override the default input video sync type selected by the system. Use the +/ON or -/OFF keys to
scroll through the available settings: AUTO, SOG, CSYNC, and H&V. The selected setting will be updated on the
VFD display. As the setting is changed, you will see the change on the image displayed on the Preview 1 output.
NOTE: 3 and 4-wire sources should be manually set to the correct sync type.
Manual #26-0111200-00 / Revision E ScreenPro Multi-Screen Remote 19