FOLSOM ScreenPRO FC-0608 Installation And Operator's Manual page 24

INPUT COLOR BALANCE
This menu item will display the color balance adjustment menu. The format of the menu displayed is controlled by
the input type selection.
INPUT COLOR BALANCE RGB COLBAL
This menu is displayed when an RGB input source type is selected. The menu items allow the user to
adjust the red, blue, and green brightness and contrast settings independently of the overall brightness and
contrast settings. The settings can be adjusted by +/-25.0% using the +/ON or -/OFF keys as well as the
joystick knob. To reset the settings, use the down arrow to highlight the RESET BALANCE menu item and
press the +/ON key. The VFD display updated to show the currently selected settings and the Preview
monitor of Screen 1 changes to display the effect of the changes.
INPUT COLOR BALANCE YUV COLBAL
This menu is displayed when a YUV (BETA) input source type is selected. The menu items allow the user
to adjust the saturation from 0.0% to 200% and to adjust the red, blue, and green brightness and contrast
settings by +/- 25.0% independently of the overall brightness and contrast settings. The changes can be
performed using the +/ON or -/OFF keys as well as the joystick knob. To reset the settings, use the down
arrow to highlight the RESET BALANCE menu item and press the +/ON key. The VFD display updated to
show the currently selected settings and the Preview monitor of Screen 1 changes to display the effect of
the changes.
INPUT COLOR BALANCE ENC COLBAL
This menu is displayed when a composite or S-Video input source type is selected. The menu items allow
the user to adjust the saturation from 0.0% to 200% and to adjust the hue between 0 and 360 degrees. The
changes can be performed using the +/ON or -/OFF keys as well as the joystick knob. To reset the settings,
use the down arrow to highlight the RESET BALANCE menu item and press the +/ON key. The VFD
display updated to show the currently selected settings and the Preview monitor of Screen 1 changes to
display the effect of the changes.
NPUT PROCESSING
I
This menu contains items to control the input video processing performed by the ScreenPROs.
INPUT PROCESSING ASPECT RATIO
This menu item is applicable to all sources as well as RGB HDTV type sources. For any of these
video types, a selection of FULL or WIDE becomes available. When set to FULL the image will be
allowed to fill the entire output raster. If WIDE is selected, the top and bottom of the output raster
are cropped to a 16:9 Aspect Ratio. This feature is especially useful when used with Wide-Screen
DVD sources. It will allow you to PIP this type of source without seeing the Black Bars at the top
and bottom of the PIP.
INPUT PROCESSING DC RESTORE
This menu items allows the user to select one of three DC Restoration modes (PRCH, PDLY, or SYNC).
The default mode is DC restore to the back porch of the incoming video signal (PRCH). The PDLY mode is
used when a tri-level sync is on the input, such as an HDTV signal. The SYNC mode selects DC restoration
to the sync interval and may be useful for videos without a back porch interval. Use the +/ON or -/OFF keys
to change this item.
INPUT PROCESSING DE-INTRLC BYPASS
This menu items is only applicable to NTSC or PAL input video. The de-interlacer should be on for optimal
performance with full motion video. Turn the de-interlacer off for Camera feeds in order to reduce processing
delay through the system. Use the +/ON or -/OFF keys to change this item.
INPUT PROCESSING 3:2 PD DETECT
This menu items is only applicable to standard video (component, s-video, or composite) inputs. The default
mode is OFF. The 3:2 Sequence Detect feature should be turned on to process video derived from film
source material. Use the +/ON or -/OFF keys to change this item.
Manual #26-0111200-00 / Revision E ScreenPro Multi-Screen Remote 20