FOLSOM ScreenPRO FC-0608 Installation And Operator's Manual page 32

SYSTEM RECALL OPTION
Recall options allow the user to select which items are recalled from Preset Memories when a system preset key is
pressed. For example, if the Recall Option Effect is turned OFF, the Transition Effect will not be recalled from Preset
Memories. Use the +/ON and -/OFF keys to configure the option.
SYSTEM DIAGNOSTICS DIAGNOSTICS
This menu is used to test the controller's hardware. Use the UP and DOWN arrow keys to highlight the desired test
to execute and press the RIGHT arrow key.
SYSTEM DIAGNOSTICS VFD TEST
This menu is used to test the controller's VFD display hardware. Use the UP and DOWN arrow keys to
highlight the desired test to execute and press the +/ON key.
SYSTEM DIAGNOSTICS VFD TEST BRIGHTNESS TEST
This diagnostic test verifies the VFD display hardware by changing the display brightness through all
possible settings. The display should change from dim to bright in 16 steps. The information on the screen
should not flicker, drop out, or change other than in intensity. If the display shows traces of previous display
information, the brightness setting is probably too high and should be reduced to avoid further screen burn-
in.
Manual #26-0111200-00 / Revision E
RECALL OPTIONS
PREVIEW
EFFECT
RATE
DIAGNOSTICS
VFD TEST
JOYSTICK / TBAR TEST
KEY DETECTION TEST
LED TEST
VFD TESTS
BRIGHTNESS TEST
PIXEL TEST
ON
ON
ON
[+]
[+]
ScreenPro Multi-Screen Remote 28