Required Equipment - Avaya G350 Installation Manual

Required equipment

You need the following equipment to assist you in the installation:
•
One loop start analog trunk for connecting a modem.
•
A separate telephone line for speaking to the service technician.
You may also need some of the following equipment for mounting the G350:
•
A Phillips screwdriver if rack mounting or wall mounting the G350.
•
If you will mount the G350 to a flat wall: screws to fasten the G350 to the wall.
•
If you will mount the G350 to a non-flat wall:
•
A 415 x 465 mm plywood board, 20 mm (0.79 in) thick.
•
Wood screws to fasten the G350 to plywood.
•
Screws to fasten the plywood board to the wall.
If you are installing an S8300 media server in the G350, you also need:
•
One USB modem. The recommended USB modem is Multitech MultiModemUSB MT5634ZBA-
USB-V92.
•
One USB CD-ROM drive.
•
A laptop computer with internet browser.
If you are not installing an S8300 media server in the G350, you also need:
•
A PC on the local network with a CD-ROM drive.
•
A laptop computer running Windows XP or Windows 2000 and with a serial port recognized by
the operating system on the laptop. If the port is recognized, it is listed by the Device Manager.
•
A modem to connect to the G350 to enable dial-in configuration. The recommended modem is the
Multitech MultiModemZBA MT5634ZBA-V-V92.
Installation of the G350 Media Gateway
December 2003
Before you start
Required equipment
17