Report Scheduler Preferences - Avaya CCM 3.1 Manual

Report Scheduler

Report Scheduler Preferences

General Preferences
Update Interval
Auto Start
Columns Preferences
CCM 3.1
Report Manager
To set the preferences for Report Scheduler:
• From the Setup menu, select the Preferences option.
This section allows you to set the interval that the schedule list is
automatically refreshed, pending any tasks that are running and the printers
available to clients. The maximum interval for this setting is 20 minutes.
In this area you can set up whether the application runs when Windows is
started and if it is how it will run. If you select the option Run when
windows starts the associated options become available.
•
Display normally causes the splash screen to be displayed and
subsequently the schedule screen (pending a successful connection to
the repository database).
•
Start Minimised causes the Display Splash screen option to become
available. If Display Splash screen is not selected, the application will
display the schedule screen minimised. Selecting Display Splash
screen causes the splash screen to be displayed when the application
starts and subsequently display the schedule screen minimised.
Note: Database connection failure prompts will be displayed regardless of the
options selected.
The Columns tab enables control of the columns displayed in the schedule
screen. Each column listed has an associated check box, which can be
used to determine which columns are displayed and which are not. The
position of a column can be changed by selecting it in the list and then
using the up and down arrows to move it either up the listing or down the
listing. The top of the list is the left most column shown in the Schedule
screen. When a column is de-selected, the name is shown at the end of
the listing.
Note: The row number and the status column cannot be moved and cannot be
hidden.
Report Scheduler Preferences
38HBK00001SCB Issue 9 (18/07/2002)
Page 12