Table of Contents
Advertisement
Index
WAN Interface
Domain Name
Active
View Log
Force Update
3.
Select Index number 1 to add an account for the router. Check Enable Dynamic DNS
Account, and choose correct Service Provider: dyndns.org, type the registered
hostname: hostname and domain name suffix: dyndns.org in the Domain Name block.
The following two blocks should be typed your account Login Name: test and
Password: test.
Enable Dynamic
DNS Account
WAN Interface
Service Provider
Service Type
Domain Name
Login Name
Password
4.
Click OK button to activate the settings. You will see your setting has been saved.
The Wildcard and Backup MX features are not supported for all Dynamic DNS providers.
You could get more detailed information from their websites.
Vigor2910 Series User's Guide
Click the number below Index to access into the setting
page of DDNS setup to set account(s).
Display current WAN interface used for accessing
Internet.
Display the domain name that you set on the setting page
of DDNS setup.
Display if this account is active or inactive.
Display DDNS log status.
Force the router updates its information to DDNS server.
Check this box to enable the current account. If you did
check the box, you will see a check mark appeared on the
Active column of the previous web page in step 2).
Select the WAN interface order to apply settings here.
Select the service provider for the DDNS account.
Select a service type (Dynamic, Custom, Static). If you choose
Custom, you can modify the domain that is choosen in the
Domain Name field.
Type in a domain name that you applied previously. Use the
drop down list to choose the desired domain.
Type in the login name that you set for applying domain.
Type in the password that you set for applying domain.
97
Advertisement
Table of Contents
