Draytek Vigor2910 Series User Manual page 103

For adding a new rule, click Add to open the following page.
ACT
Source Address
Destination Address
SrcEdit/DestEdit
DiffServ CodePoint
Vigor2910 Series User's Guide
Check this box to invoke these settings.
Click the SrcEdit button to set the source address for the rule.
Click the DestEdit button to set the destination address for the
rule.
It allows you to edit source address information.
Address Type – Determine the address type for the source
address.
For Single Address, you have to fill in Start IP address.
For Range Address, you have to fill in Start IP address and
End IP address.
For Subnet Address, you have to fill in Start IP address and
Subnet Mask.
All the packets of data will be divided with different levels
and will be processed according to the level type by the
system. Please assign one of the level of the data for
processing with QoS control.
93