Table of Contents
Advertisement
3
.
1
6
.
2
T
R
-
0
6
9
3
.
1
6
.
2
T
R
-
0
6
9
Vigor router with TR-069 is available for matching with VigorACS server. Such page
provides VigorACS and CPE settings under TR-069 protocol. All the settings configured
here is for CPE to be controlled and managed with VigorACS server. Users need to type
URL, username and password for the VigorACS server that such device will be connected.
However URL, username and password under CPE client are fixed that users cannot change
it. The default CPE username and password are "vigor" and "password". You will need it
when you configure VigorACS server.
ACS Server
Vigor2910 Series User's Guide
S
e
t
t
i
n
g
S
e
t
t
i
n
g
Such data must be typed according to the ACS (
Configuration Server) you want to link. Please refer
to VigorACS user's manual for detailed information.
URL - Type the URL for VigorACS server.
If the connected CPE needs to be authenticated, please
set URL as the following and type username and
password for VigorACS server:
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
If the connected CPE does not need to be authenticated
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServ
let
Username/Password - Type username and password for
197
Auto
Advertisement
Table of Contents
