Table of Contents
Advertisement
IPSec Security Method
User Name
Password
Remote Network IP
Remote Network Mask
After finishing the configuration, please click Next. The confirmation page will be shown as
follows. If there is no problem, you can click one of the radio buttons listed on the page and
click Finish to execute the next action.
Go to the VPN Connection
Management
Do another VPN Server
Wizard Setup
View more detailed
configuration
Profiles (set from VPN and Remote Access>>IPSec
Peer Identity).
Medium - Authentication Header (AH) means data will
be authenticated, but not be encrypted. By default, this
option is active.
High - Encapsulating Security Payload (ESP) means
payload (data) will be encrypted and authenticated. You
may select encryption algorithm from Data Encryption
Standard (DES), Triple DES (3DES), and AES.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
Please type one LAN IP address (according to the real
location of the remote host) for building VPN connection.
Please type the network mask (according to the real
location of the remote host) for building VPN connection.
Click this radio button to access VPN and Remote
Access>>Connection Management for viewing VPN
Connection status.
Click this radio button to set another profile of VPN Server
through VPN Server Wizard.
Click this radio button to access VPN and Remote
Access>>LAN to LAN for viewing detailed configuration.
110
Vigor2910 Series User's Guide
Advertisement
Table of Contents
