Xerox LightScribe User Manual page 50

Step 6: Once you have finished selecting the
tracks on this Audio CD you want to mix, you
can press the up or down button until you
see "Are you done?" on the 2nd line as in the
following screen .
Step 7: You can now press >> button to
confirm your selection . The duplicator will
now start the mixing process as shown in the
following screen .
•
"1" indicates that the system is currently
transferring track one.
•
"10%" indicates that the current transferring
progress of the current track, track one.
•
"4m:31s" indicates the current running time
of that track.
Step 8: Once the mixing process is completed,
you will see the following screen:
When you're finished adding tracks, you can
choose to finalize the job (mark the comple-
tion) by performing the following steps:
Press the >>button when you see "Finish
a
Mixing?" on the 2nd line of the screen
like below .
Then press the >>button to submit, and
b
you should see the following confirma-
tion screen:
Press the >> button once to confirm your
c
selection, and you should see the
following Finalizing screen (if you choose
to mix directly to a blank CD) or Copying
screen (if you choose to mix through the
hard drive) .
50 Xerox LS Duplicator
Total: 6 Trk 26m:17s
Are you done?
Mixing...
10% 4m:31s
Mixing Complete!
Finish Mixing?
Mixing Complete!
Finish Mixing?
Mixing Complete!
Confirm to Finalize?
Finalizing...
Please Wait
OR
Copying... H 228MB
0/1 10%
1
401MB