Xerox LightScribe User Manual page 48

When you turn on your duplicator, after it
has booted up, you should see the following
signifying your duplicator is ready .
Step 1: Use the up or down arrow button to
navigate to the Mix Audio Tracks menu .
Step 2: Press the >> button to enter the Mix
Audio Tracks menu and you shall see the Mix
Mode screen similar to below (If your duplica-
tor is a CD+G Duplication Duplicator or does
not have a hard drive installed, please skip
ahead to Step ):
At this point, you can press the UP or DOWN
arrow to choose how you want to mix your
audio tracks, either by mixing through the
hard drive or directly to blank CD's . Then
press the >>button to submit your selection .
Step 3: Once the Mix Mode selection is
submitted, you shall see following Preparation
screen and the corresponding trays that do
not contain disc(s) in them will automatically
be ejected:
48 Xerox LS Duplicator
DUPLICATOR
1.Copy
DUPLICATOR
10.Mix Audio Tracks
Mix Mode:
Directly to Blank CD
Preparing
Waiting for Master
OR
Preparing
Waiting for a Blank
Note
If either one of the above
screens is displayed for more
than 2 minutes after you
have placed your master disc
or blank disc into the drives,
please check the disc quality.
2.20
2.20