Xerox LightScribe User Manual page 46

Step 3: Select the Correct Speed Type
There are different types of recording speed
based on the disc format and source:
• HDD/CD to CD: Copying to CD-R/RW me-
dia from a pre-loaded CD partition/image
in the hard drive or a CD master disc in the
Reader/Writer .
HDD/DVD to DVD: Copying to DVD±R
•
media from a pre-loaded DVD partition/im-
age in the hard drive or a DVD master disc
in the Reader/Writer .
HDD/DVD-DL to DVD-DL: Copying to
•
Double/Dual Layer Recordable DVD media
from pre-loaded a DVD-DL partition/image
in the hard drive or a Double/Dual Layer
DVD master disc in the Reader/Writer .
Depending on the type of duplication job(s)
and your duplicator restrictions, you need to
select the correct speed type in order for this
setting to take effect . To select various speed
types, you need to press the up or down
button to adjust and press the >>button to
submit your selection .
Step 4: Once you have submitted the desired
speed types, you should see the following
screen for speed adjustment .
You can press the up or down button to select
the desired speed value and then press the >>
to submit the selection .
46 Xerox LS Duplicator
CD to CD Speed:
16x
Note
If the speed value you've
selected is the same as the cur-
rent speed value, the duplicator
will NOT respond to the >> but-
ton. Please press the << button
to go back to the main menu.