Mix Audio Tracks - Xerox LightScribe User Manual

Table of Contents

Advertisement

Step 5: Once the speed setting has been suc-
cessfully changed, you shall see the following
screen for 2 seconds .
Then you will be directed back to the main
menu:

Mix Audio Tracks

This process will guide you to mix an Audio
CD from various tracks among different Audio
CDs .
The following are the ways you can mix an
Audio CD:
Mix directly to Blank CD-R media
(This option is not available if you have a
CD+G Duplication Duplicator):
By mixing an audio CD directly to blank
CD-R media, all the tracks you selected
will be transferred to the blank CD-R
media directly track by track . Once you've
completed your track selection(s); you will
be instructed to finalize your mixed Audio
CD . You can operate this by choosing "Edit
Track to: Blank CD" when asked .
Mix through the Hard Drive
(This option is available ONLY if your dupli-
cator has a hard drive installed.):
By mixing an audio CD through the Hard
Drive, all the tracks you select will be
transferred to the Hard Drive . Once you've
completed your track selection(s); you will
be instructed to copy them onto a blank 80
min CD-R media . You can operate this func-
tion by choosing "Edit Track to: Hard Drive"
when asked .
CD to CD Speed:
Adjusted to: 24x
DUPLICATOR
1.Copy
Note
Please do this cautiously; if any
of the Audio CD tracks you wish
to mix are not readable due
to scratches or poor quality,
the blank CD-R media will be
ruined.
Note
This is considered a safer
method to perform the mix au-
dio tracks. If any of the Audio
CD tracks you wish to mix are
not readable due to scratches
or bad quality, the blank CD-R
media will NOT be ruined since
the blank CD-R media isn't be-
ing recorded on until all Audio
CD tracks are successfully
transferred to the hard drive.
Xerox LS Duplicator
2.20
47

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LightScribe and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Lightscribe x.10

Table of Contents