Xerox LightScribe User Manual page 56

Test
4
This menu will guide you to make a simu-
lation of the copying process . During this
simulation process, all write once
recordable discs such as (DVD-R, CD-R)
will be reusable . The purpose of perform-
ing such simulation is to ensure error free
duplication .
Compare
5
This menu will guide you to perform a
bit-by-bit comparison between your
master disc (or master disc image on the
hard drive) and all the copied discs . The
reason to perform this compare opera-
tion is to ensure all of your copies
identically compare to the master disc .
Test + Copy
6
This menu will guide you to perform the
simulation of copying process and if
everything passes during the simulation,
the real copying process will be per-
formed . If there's an error encountered
during the simulation, an error message
will be displayed and the copying process
will not be initiated .
Copy + Compare
7
This menu will guide you to make copies,
after which, it will perform an additional
comparison process automatically to
ensure data correctness .
Select Burn Speed
8
This menu will guide you to adjust the
duplication speed on various duplication
job types . For more information, please
refer to "Select the Duplication Speed"
on page 45 .
56 Xerox LS Duplicator
Warning
Due to the physical limita-
tion of DVD+R/RW & BD-R/RE
recordable format, you can
not perform this procedure on
these formats. If you do so,
you will encounter a failure
messages.
Warning
If you are using CD-RW/DVD-
RW discs as your blank media
during the simulation, any
content that may have been
recorded inside those discs will
be permanently erased.