Section 1: Loading Master Disc Content Into The Hard Drive As A Partition/Image - Xerox LightScribe User Manual

The following steps will show you how to
load your master disc into the installed hard
drive as an image and copy the stored im-
age onto blank discs .
Section 1: Loading Master Disc
content into the Hard Drive as
a partition/image.
* Please skip to Section 3 if you've al-
ready transferred your CD/DVD image file
or LightScribe label file into the duplica-
tor's hard drive from your Computer. See
page 31 for more detail.
When you turn on your duplicator, after it
has booted up, you should see the following
signifying your duplicator is ready .
Step 1: Use the up or down arrow button to
navigate to the Hard Drive Setup menu .
Step 2: Press >> button to enter the Hard
Drive Setup menu .
If the current source is not Hard Drive, you
will see the screen below . Please press the
>>button once to proceed .
Duplicator
1. Copy
Duplicator
9. Hard Drive Setup
Select HDD as Source
OK?
Once you've entered the Hard
Drive Setup menu, you will see
following screen:
Hard Drive Setup
1. Select Partition
Xerox LS Duplicator
2.20
2.20
27