Remote Management Function; Network Default Values - NEC Express5800/320Fd-LR User Manual

REMOTE MANAGEMENT FUNCTION

320Fd-LR and 320Fd-MR models are equipped with the optional card, N8815-005/006 ft Remote
Management Card on the server. By connecting to a network via their management LAN port, BMC
(Baseboard Management Controller), an LSI for system management, installed on the server allows
remote monitoring and controlling of the server such as keyboard, video and mouse (KVM) control
over management network.

Network Default Values

The following are default values to connect the server to a network.
The host name above is the host name used for auto registering with a DNS server using
DHCP functions.
XXXXXXXXXXXX is the MAC address assigned to each management card. The MAC
address can be found on the label attached to the rear of the card or [Server] – [System
Management] – [CRU0 BMC MAC Address]/[CRU1 BMC MAC Address] on the BIOS Set
UP screen.
IMPORTANT:
The communication mode on the management LAN board is fixed as auto negotiation
mode; it cannot be changed manually. At the same time, set the communication on the link
partner side as auto negotiation mode.
The default IP address of the management LAN is 192.168.1.1 for both CPU/IO module #0
and CPU/IO module #1. Therefore, the servers are unable to connect network
simultaneously without changing this IP address. In order to enable the network
connections simultaneously, specify different IP address for each CPU/IO module.
To ensure security, change values for host name, password and IP address according to your
network environment.
IP Address : 192.168.1.1
User Name : administrator
Password : (None)
Host Name : ARMCXXXXXXXXXXXX
System Configuration 4-49