Slot1 Pci 33Mhz Oprom; Slot2 Pci 33Mhz Oprom; Cpu1 Slot3 Pci-E 3.0 X8 (In X16) Oprom; Slot4 Pci 33Mhz Oprom (X9Srh-7F Only) - Supermicro Supero X9SRH-7F User Manual

X9SRH Motherboard Series User's Manual

Slot1 PCI 33MHZ OPROM

Slot2 PCI 33MHZ OPROM

CPU1 Slot3 PCI-E 3.0 x8 (in x16) OPROM

Slot4 PCI 33MHz OPROM (X9SRH-7F only)

PCH Slot5 PCI-E 2.0 x4 OPROM

CPU1 Slot6 PCI-E 3.0 x16 OPROM

Use this feature to enable or disable PCI-E slot Option ROMs. The options are
Disabled and Enabled.

Onboard LAN Option ROM Select

This feature selects whether to load the iSCSI or PXE onboard LAN option ROM.
The options are iSCSI and PXE.

Load Onboard LAN1 Option ROM / Load Onboard LAN2 Option ROM

This feature is to enable or disable the onboard option ROMs. The options are Dis-
abled and Enabled. The default for LAN 1 is Enabled. Default for LAN 2 is Disabled.

VGA Priority

This option allows the user to specify which graphics controller to be used as the
primary boot device. The options are Onboard and Offboard.

Network Stack

Use this feature to enable or disable the network stack (PXE and UEFI). The op-
tions are Disabled and Enabled.

IPv4 PXE Support (Available when Network Stack is set to Enabled)

Set this item to Enabled to activate IPv4 PXE Support. The options are Enabled
and Disabled.
Super IO Device Configuration

 Serial Port 1 Configuration / Serial Port 2 Configuration

Serial Port 1 / Serial Port 2

Select Enabled to enable the onboard serial port. The options are Enabled
and Disabled.

Serial Port 1 Settings / Serial Port 2 Settings

This option specifies the base I/O port address and the Interrupt Request
address of Serial Port 1 and Serial Port 2. Select Disabled to prevent the
serial port from accessing any system resources. When this option is set to
Disabled, the serial port becomes unavailable.
The options for Serial Port 1 are:
4-14