Delete Attempts; Change Attempt Order; Intel(R) Intel Ethernet Controller X540-At2; Nic Configuration - Supermicro Supero X9SRH-7F User Manual

Boot LUN - This is the target's LU number in Hexadecimal format.
Authentication Type - Select CHAP or None.
If CHAP is selected above:
CHAP Type - Select One Way or Mutual.
CHAP Name - Assign a name for this authentication.
CHAP Secret - Assign a secret word that is also defined in the target
iSCSI device. Minimum length is 12 bytes and maximum is 16 bytes.
When finished, select Save Changes and select Back to Previous Page.

Delete Attempts

This feature deletes previously defined attempts as above.

Change Attempt Order

This feature changes the order in which several iSCSI connection attempts are
made.

Intel(R) Intel Ethernet Controller X540-AT2/

Intel(R) Intel Ethernet Controller X540-AT2
NIC Configuration

Link Speed

Use this feature to select the link speed to be used. The options are Au-
toNeg, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half and 100 Mbps Full.

Wake On LAN

Use this feature to activate the Wake On LAN (WOL) feature. The op-
tions are Enabled, and Disabled.

Blink LEDs (Range 0-15 seconds)

Please specifies the blink rate of the NIC LED. Select fron 1-15 second
intervals.
Port Configuration Information
This section displays the current configuration of the Network Interface.
4-19
Chapter 4: AMI BIOS