Sr-Iov Support; Pci-E Slot 4, 5, 6, & 7 Oprom; Onboard Lan Option Rom Select; Load Onboard Lan1 Option Rom/Load Onboard Lan2 Option Rom - Supermicro Supero X9SCi-LN4 User Manual

SR-IOV Support

Single Root I/O Virtualization (SR-IOV) is a specification that allows a PCIe device
to appear as multiple physical devices to the system. The options are Disabled
and Enabled.
PCI-E Slot 4, 5, 6, & 7 OPROM
Use this feature to enable or disable PCI slot Option ROMs. The options are Dis-
abled and Enabled.

Onboard LAN Option ROM Select

This feature selects whether to load the iSCSI or PXE onboard LAN option ROM.
The options are iSCSI and PXE.

Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM

This feature is to enable or disable the onboard option ROMs. The options are
Disabled and Enabled.
Super IO Device Configuration


Serial Port 1 / Serial Port 2

Select Enabled to enable the onboard serial port. The options are Enabled and
Disabled.

Serial Port1 Settings/ Serial Port2 Settings

This option specifies the base I/O port address and the Interrupt Request address
of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from
accessing any system resources. When this option is set to Disabled, the serial port
physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use 3F8
as its I/O port address and IRQ 4 for the interrupt address. The options for Serial
Port1 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2F8/IRQ3 and 2E8/IRQ3. The options for
Serial Port2 are Disabled, 3F8/IRQ4, 3E8/IRQ4, 2F8/IRQ3, and 2E8/IRQ3.
Remote Access Configuration

COM0/COM1/SOL Console Redirection
Use this feature to enable console redirection for COM0 and COM1 ports. The op-
tions are Enabled and Disabled. The default for all ports are Disabled.
 Console Redirection Settings
Configure the following options for the Console Redirection Settings. The
most common settings are set as default:
4-11
Chapter 4: AMI BIOS