Steinberg UR 824 Operation Manual page 13

DIGITAL MODE
Selects the input and output signal format of the
OPTICAL A/B.
Option Description
ADAT This is an input and output signal
format supporting up to 8 channels.
S/PDIF This is a 2-channel input and output
signal format.
When ADAT is selected, the OPTICAL A/B
terminals input and output signals of up to eight
channels at 44.1 kHz and 48 kHz, or up to four
channels at 88.2 kHz and 96 kHz. When S/PDIF is
selected, the OPTICAL A/B terminals input and
output signals of up to two channels at any
available sample rate.
LINE OUT
Selects the output signal of the LINE OUTPUT.
OPTICAL A/B OUT
Selects the output signal of the OPTICAL A/B
OUT.
The number of OUT selections displayed here
varies depending on the sample rate or DIGITAL
MODE setting.
Knob Control
Selects which LINE OUTPUT signal level is to be
adjusted by the OUTPUT LEVEL knob on the
device. You can select more than one LINE
OUTPUT at the same time. Checkmarks indicate
the selected LINE OUTPUT signals.
Master Level Knob
Adjusts the output signal level of the LINE
OUTPUT. Please note that this Master Level knob
is disabled for the LINE OUTPUT with a
checkmark on the Knob Control.
Master Level
Indicates the output signal level of the LINE
OUTPUT.
Panel Controls for the Software Programs
KNOB MOUSE CONTROL
Selects the method of operating the knobs on the
dspMixFx UR824.
Option Description
Circular Drag in a circular motion to increase
and decrease the parameter. Drag in
a dial clockwise to increase, and
counterclockwise to decrease. If you
click any point on the knob, the
parameter will jump there instantly.
Linear Drag in a linear motion to increase
and decrease the parameter. Drag to
the upward or rightward to increase,
and downward or leftward to
decrease. Even if you click any point
on the knob, the parameter will not
jump there.
SLIDER MOUSE CONTROL
Selects the method of operating the sliders and
faders on the dspMixFx UR824.
Option Description
Jump Click any point on the slider and
fader to increase and decrease the
parameter. If you click any point on
the slider and fader, the parameter
will jump there instantly.
Touch Drag the handle of the slider and
fader to increase and decrease the
parameter. Even if you click any
point on the slider and fader, the
parameter will not jump there.
UR824
Operation Manual 13