Sweet Spot Morphing Channel Strip (Channel Strip); Settings Window - Steinberg UR 824 Operation Manual

Master Level
Indicates the output signal level of the LINE
OUTPUT.
Master Level knob
Adjusts the output signal level of the selected
(highlighted) LINE OUTPUT signal. Please note
that this Master Level Knob will not appear when
selecting a LINE OUTPUT with a checkmark on
the Knob Control.
Reset
Sets the output signal level of all LINE OUTPUT
signals not selected in the Knob Control to 0 dB.

Settings Window

This is the window for configuring the device
settings.
HPF
Selects the cutoff frequency of the high pass filter.
Option: 120 Hz, 100 Hz, 80 Hz, 60 Hz, 40 Hz
DIGITAL MODE
Selects the input and output signal format of the
OPTICAL A/B.
Option Description
ADAT This is an input and output signal
format supporting up to 8 channels.
S/PDIF This is a 2-channel input and output
signal format.
When ADAT is selected, the OPTICAL A/B
terminals input and output signals of up to eight
channels at 44.1 kHz and 48 kHz, or up to four
channels at 88.2 kHz and 96 kHz. When S/PDIF is
selected, the OPTICAL A/B terminals input and
output signals of up to two channels at any
available sample rate.
Panel Controls for the Software Programs
Sweet Spot Morphing Channel
Strip (Channel Strip)
This is the window for configuring the Channel Strip
settings.
NOTE
•The Channel Strip equipped with the device and
the Channel Strip of the VST Plug-in version have
the same parameters.
•When using the Channel Strip on Cubase series
programs, you can share the settings between the
built-in Channel Strip and the Channel Strip of the
VST Plug-in version as a preset file.
•When using the built-in Channel Strip on Cubase
series programs, turn on the "Direct Monitoring"
setting in the program.
•When assigning the Channel Strip of the VST Plug-
in version to the effect slot on Cubase series
programs, select it from the "Dynamics" category
(in the case of the default settings).
Screenshot
How to Open the Window
From Dedicated Windows for Cubase Series
Click "Channel Strip Edit" (page 16) in the section
"Input Settings Window."
From the dspMixFx UR824
Click "Channel Strip Edit" (page 10) in the section
"Channel Area."
Operation Manual
UR824
18