Signal Flow - Steinberg UR 824 Operation Manual

Signal Flow

The following chart indicates the signal flow in the device.
NOTE
•The controllers on the device, such as the HI-Z switch, INPUT GAIN knob, and OUTPUT LEVEL knob, are not
included in this chart.
•To configure each parameter, use the "dspMixFx UR824" (page 8) or "Dedicated Windows for Cubase Series"
(page 14).
•Some parts of the following signal flow may differ depending on the routing settings in the device.
From From
MIC/LINE/ MIC/LINE
HI-Z 1 INPUT 8
Ch. Strip Ch. Strip
(INS.FX) (INS.FX)
*1
Ch. Strip Ch. Strip
(MON.FX) (MON.FX)
Volume Volume
Pan Pan
REV-X select
REV-X REV-X
Send Send
Level Level
From From
OPTICAL OPTICAL
A IN 1 B IN 8
Ch. Strip Ch. Strip
(INS.FX) (INS.FX)
Ch. Strip Ch. Strip
(MON.FX) (MON.FX)
Volume Volume
Pan Pan
*2
REV-X REV-X REV-X
Send Send Return
Level Level Level
REV-X
Volume
Pan
MIX 1
MIX 2
MIX 3
MIX 4
REV-X REV-X REV-X
Return Return Return
Level Level Level
Appendix
To DAW
input
From DAW
output
To LINE
OUTPUT 1/2
To LINE
OUTPUT 7/8
To OPTICAL A
OUT 1/2
To OPTICAL B
OUT 7/8
To PHONES 1
To PHONES 2
*3
Operation Manual
UR824
28