Steinberg UR 824 Operation Manual page 17

Hardware Setup Window
Headphones Window
This is the window for selecting the output signal of
the PHONES on the device.
Phones 1
Selects the output signal of PHONES 1.
Phones 2
Selects the output signal of PHONES 2.
Reverb Routing Window
This is the window for configuring the "REV-X" (page
20) settings.
REV-X Edit
Opens the "REV-X" (page 20) setup window.
REV-X Type
Selects the REV-X type.
Option: Hall, Room, Plate
REV-X Time
Adjusts the reverb time of the REV-X. This
parameter links to Room Size. The adjustable
range varies depending on the REV-X type.
REV-X type Range
Hall 0.103 sec – 31.0 sec
Room 0.152 sec – 45.3 sec
Plate 0.176 sec – 52.0 sec
REV-X Send Source Select
Selects the send source signal which is sent to
the REV-X. You can select one signal at a time.
The checkmark will be on the selected signal.
REV-X Send Source
Indicates the signal which is sent to the REV-X.
Panel Controls for the Software Programs
REV-X Return Level
Indicates the return level of the REV-X.
REV-X Return Level knob
Adjusts the return level of the selected
(highlighted) signal.
Range: -∞ dB – +6.00 dB
Output Routing Window
This is the window for selecting the output signal of
the output jacks on the device.
LINE OUT
Selects the output signal of the LINE OUTPUT.
OPTICAL A/B OUT
Selects the output signal of the OPTICAL A/B
OUT.
The number of OUT selections displayed here
varies depending on the sample rate or DIGITAL
MODE setting.
Master Levels Window
This is the window for configuring the master level of
the output jacks on the device.
Knob Control
Selects which LINE OUTPUT signal level is to be
adjusted by the OUTPUT LEVEL knob on the
device. You can select more than one LINE
OUTPUT at the same time. Checkmarks indicate
the selected LINE OUTPUT signals.
Master Source
Indicates the LINE OUTPUT.
Operation Manual
UR824
17