Mps Version Control For Os; Advanced Chipset Features; Dram Timing Selectable; Cas Latency Time - Albatron PX845EV1 Series User Manual

MPS Version Control For OS

The 1.1 version is the older version that supports 8 more IRQs in the Windows NT
environment. Choose the new 1.4 version for Windows 2000 and Windows XP.
Options: 1.4 (default)、1.1
OS Select For DRAM > 64MB
Select "OS2" only if you are running the OS/2 operating system with greater than 64MB of
RAM. Options: Non-OS2 (default)、OS2
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to
attempt to predict the possible failure of storage drives.
Options: Disabled (default)、Enabled
Small LOGO (EPA) Show
This item allows you to show or hide the small LOGO EPA.
Options: Disabled (default)、Enabled

Advanced Chipset Features

DRAM Timing Selectable

This item determines DRAM clock/ timing using SPD or manual configuration.
Make sure your memory module has SPD (Serial Presence Data), if you want to select the
<By SPD> option. Options: Manual, By SPD (default)

CAS Latency Time

This item determines CAS Latency. When synchronous DRAM is installed, the number of
clock cycles of CAS latency depends on the DRAM timing. Do not reset this field from the
default value specified by the system designer. Options: 1.5、2、2.5、3 and By SPD (default)
Active to Precharge Delay
This item allows you to select DRAM Active to Precharge Delay
Options: 7、6、5 and By SPD (default)
DRAM RAS# to CAS# Delay
This item allows you to select a delay time between the CAS and RAS strobe signals. It
only applies when DRAM is written to, read from, or refreshed.
Options: 3、2 and default is by SPD
PX845EV1/ PX845EV1 PRO
31