Albatron PX845EV1 Series User Manual page 23

Headers & Jumpers
Front USB Headers: USB2 / USB3
1 2
+5V +5V
DATA_A- DATA_B-
DATA_A+ DATA_B+
Ground Ground
NC NC
9 10
USB2
1 2
+5V +5V
DATA_A- DATA_B-
DATA_A+ DATA_B+
Ground Ground
NC NC
10
9
USB3
USB Bracket (optional)
You can connect the USB bracket to the USB2 and USB3 Headers.
* If you are using USB 2.0 devices, you will need to install the USB 2.0 driver from the
®
Microsoft website.
Case Open Warning connector: CASE OPEN
This connector is used to notify the user when the computer case has been previously
opened. To configure this functionality, your computer case must be equipped with a " case
open" cable which you need to attach to the CASE OPEN connector. Also, you must enable
CASE OPEN warning functionality in the BIOS setup utility. When your computer case is
opened, your system will display alert messages upon boot up. Note that your computer case
must be equipped with a "case open" cable.
INTRUDR- 1
Ground 2
CASE OPEN
PX845EV1/ PX845EV1 PRO
DIMM1
DIMM2
DIMM3
ATX_PWR
The layout is PX845EV1 PRO
DIMM1
DIMM2
DIMM3
ATX_PWR
The layout is PX845EV1 PRO
19