Memory Installation - Albatron PX845EV1 Series User Manual

Memory Installation

The PX845EV1 series contains 3 sockets, which use 184 pin DDR SDRAM with a total
memory capacity of up to 2GB. You can install unbuffered DDR266/ DDR200 (PC2100/
PC1600) SDRAM.
DIMM1
DIMM2
DIMM3
DIMM1
DIMM2
DIMM3
RAM Module Installation:
1. Match the notch on the button of the RAM module with the corresponding
pattern in the DIMM slot. This ensures that the module is inserted properly.
2. Lower the RAM module into the DIMM Slot and press firmly using both
thumbs until the module snaps into place.
3. Repeat steps 1 & 2 for the remaining RAM modules.
Each DIMM socket is capable of using a memory
module of up to 1GB. However, if you use DIMM2
and DIMM3 at the same time, you must use
single-sided memory modules and the total memory
used by these two sockets cannot exceed 1GB.
ATX_PWR
The layout is PX845EV1 PRO
13
PX845EV1/ PX845EV1 PRO