Repair Disk - Focus FS-C User Manual

FS-C Functions

Repair Disk

Use this function if a recording session does not complete
properly and there is a question that the file may be damaged.
For example, recording terminates due to a loss of power to the
FS-C. Repair Disk scans the entire disk drive checking for and
repairing file errors and incomplete files. When the file is
repaired it is can be used in the NLE system.
Corrupted Files May Need More Repairs
After running Repair Disk some files may still need further work to restore
them. In such a case, run the utility Repair Clip, refer to the following page.
To repair a disk:
1. From the Utilities screen, go to
2. Select
YES
A status screen displays the progress of disk repair and at
completion displays the message:
•
Complete
•
Aborted
not complete.
3. Press
BACK
4. Move content from FS-C.
5. Use Format Disk utility before doing any further recording. This
step optimizes disk storage, see
86
REPAIR DISK
PRESS YES TO
REPAIR DISK
YES
and the FS-C begins repairing the disk.
indicating Repair Disk was successful.
indicating that there were errors and the repair did
to return to the
BACK
.
Repair Disk
screen.
Utilities
Format Disk
FS-C Portable DTE Recorder
on page 85.