Table of Contents
Advertisement
FS-100 Functions
Repair Disk
Use this function if a recording session does not complete properly
and there is a question that the file may be damaged. For example,
if recording terminates due to a loss of power to the FS-100.
Repair Disk scans the current partition checking for and repairing
file errors and incomplete files. When the file is repaired it can be
used in the NLE system.
The
and
Forward
partition to repair.
Corrupted Files May Need More Repairs
After running Repair Disk some files may still need further work to restore
them. In such a case, run the utility Repair Clip, refer to the following page.
To repair a disk:
1. From the Utilities screen, go to
2. Select
YES
A status screen displays the progress of disk repair and at com-
pletion displays the message:
•
Complete
•
Aborted
not complete.
3. Press
BACK
4. Move content from FS-100.
5. Use Format Disk utility before doing any further recording.
This step optimizes disk storage, see
FS-100 Portable DTE Recorder
82
REPAIR DISK
PRESS YES TO
REPAIR DISK
YES
buttons can be used to locate the
Back Index
and the FS-100 begins repairing the disk.
indicating Repair Disk was successful.
indicating that there were errors and the repair did
to return to the
BACK
.
Repair Disk
screen.
Utility
Format Disk
on page 81.
Advertisement
Table of Contents
