Tc Delay (Fs-2E Only); On Screen Display; Ff/Rw Hi Res - Focus FS-2/2E STUDIO DTE User Manual

FS-2/2E FUNCTIONS
Press EXIT to return to the menu
screen.
NOTE: You cannot set UB values after selecting
EXT TC mode in the TC MODE menu.
UB PRESET
F:00:00:00:00
| & |
MOVES CURSOR
EXIT
For DROP and NON-DROP, select the
mode. The highlighted mode is the
current mode after exit.
Press EXIT to return to the menu
screen.
DROP
NON-DROP
EXIT
This selection is not applicable for PAL use. On the
FS-2/2E display, DROP is identified by a semicolon
(;) and NON-DROP by a colon (:).

TC Delay (FS-2E only)

The TC DELAY menu is only available for the
FS-2E, or FS-2 (with the 2.0 upgrade). This menu
allows you to delay the recorded timecode up to 29
frames.
TC DELAY: 00
Use (middle soft key) and
adjust the delay value. Press EXIT when done.

On Screen Display

2 - 24
This selection allows you to turn on or off the on-
screen display on FS-2/2E's Monitor Output. The
highlighted item is saved after exit.
When you select ABS, the absolute timecode value,
or amount of time recorded to the disk, appears on
the bottom center of the monitor output.
When you select TC, the TC (Counter) timecode
value appears on the bottom center of the monitor
output.
When you select MENU, the FS-2/2E Menu
appears in the top left corner of the monitor output.
NOTE: By repeatedly pressing the front panel OSD
key, you can cycle between these modes.

FF/RW Hi Res

This screen enables or disables the FS-2/2E
forward and reverse search high resolution mode.
When enabled the following search speeds are
available:
(right soft key) to
FS-2 and FS-2E Studio DTE Disk Recorders User Guide
Part Number: MANL-0927-03
ABS
TC
MENU
OFF
EXIT
Press and
selections.
Press EXIT to return to the menu
screen.
REVERSE: -30X, -25X, -18X, -15X, -
12X, -10X, -8X, -5X, -4X, -3X, -2X,
-1/30, -1/15, -1/10, -1/6, -1/5, -1/3,-1/2
FORWARD: +30X, +25X, +18X, +15X,
+12X, +10X, +8X, +5X, +4X, +3X,
+2X, +1/30, +1/15, +1/10, +1/6, +1/5,
+1/3, +1/2
The highlighted mode is the current
mode after exit.
Press EXIT to return to the menu
screen.
to scroll though the